backfire: ar71xx: Configure WNDR3700 switch LED colors properly (backport of r23879)

For WNDR3700, use green for 1Gb/s and amber for 100Mb/s and 10Mb/s on
the four LAN port switch LEDs. The LEDs will be lit to indicate a link
and will blink to indicate activity. This matches the stock firmware
and the description printed on the label on the unit's underside.

Signed-off-by: Mark Mentovai <mark@moxienet.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@24960 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network b/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network
index eaf3fec7b61b2954c0df8f6eb886eed9f71402b5..52260e74e8bb8f1d6a9afcd73503074de767bbab 100644 (file)
--- a/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network
+++ b/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network
@@ -32,16 +32,16 @@ config switch_port
        # the switch and the section does not correspond to a real
        # switch port.
        #
        # the switch and the section does not correspond to a real
        # switch port.
        #

-       # 0=LED off; 1=Collision/FDX; 2=Link/activity; 3-1000MB/s
-       # 4=100 MB/s; 5=10 MB/s; 6=1000 MB/s+activity; 7=100 MB/s+activity
-       # 8=10 MB/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
+       # 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
+       # 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
+       # 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;

        # 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
        # 14: Link (master); 15: separate register
        # 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
        # 14: Link (master); 15: separate register

-       
+

        option device           rtl8366s
        option port             1
        option device           rtl8366s
        option port             1

-       option led              9
-       
+       option led              6
+

 config switch_port
        # Port 2 controls the ORANGE configuration of LEDs for
        # the switch and the section does not correspond to a real
 config switch_port
        # Port 2 controls the ORANGE configuration of LEDs for
        # the switch and the section does not correspond to a real


@@ -52,8 +52,7 @@ config switch_port
        
        option device           rtl8366s
        option port             2
        
        option device           rtl8366s
        option port             2

-       option led              6
-
+       option led              9

 
 config switch_port                                              
        # Port 5 controls the configuration of the WAN LED and the
 
 config switch_port                                              
        # Port 5 controls the configuration of the WAN LED and the


@@ -67,5 +66,4 @@ config switch_port
 
        option device           rtl8366s
        option port             5
 
        option device           rtl8366s
        option port             5

-       option led              6
-
+       option led              2