ar71xx: make the rtl8306 switch attach to eth0 instead of eth1 on the wrt160nl, fixes...
[openwrt-10.03/.git] / target / linux / ar71xx / base-files / etc / defconfig / wrt160nl / network
1 config interface loopback
2         option ifname   lo
3         option proto    static
4         option ipaddr   127.0.0.1
5         option netmask  255.0.0.0
6
7 config interface lan
8         option ifname   eth0
9         option type     bridge
10         option proto    static
11         option ipaddr   192.168.1.1
12         option netmask  255.255.255.0
13
14 config interface wan
15         option ifname   eth1
16         option proto    dhcp
17
18 config switch eth0
19         option reset    1
20         option enable_vlan 1
21
22 config switch_vlan
23         option device   eth1
24         option vlan     1
25         option ports    "0 1 2 3 4 5"