ath79: add generic dtsi for Ubiquiti SW boards

[openwrt/.git] / target / linux / ath79 / dts / ar7242_ubnt_edgeswitch-8xp.dts

diff --git a/target/linux/ath79/dts/ar7242_ubnt_edgeswitch-8xp.dts b/target/linux/ath79/dts/ar7242_ubnt_edgeswitch-8xp.dts
index d5a2b8530596e778568ca194cf8fface8d0a6dd4..c7ec5cddc0cf629cedcf241c4a0f79c0bf0ab38d 100644 (file)
--- a/target/linux/ath79/dts/ar7242_ubnt_edgeswitch-8xp.dts
+++ b/target/linux/ath79/dts/ar7242_ubnt_edgeswitch-8xp.dts
@@ -1,67 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar7242.dtsi"
+#include "ar7242_ubnt_sw.dtsi"
 
 / {
        compatible = "ubnt,edgeswitch-8xp", "qca,ar7242";
        model = "Ubiquiti EdgeSwitch 8XP";
 
-       chosen {
-               bootargs = "console=ttyS0,115200n8";
-       };
-
-       aliases {
-               led-boot = &led_usr;
-               led-failsafe = &led_usr;
-               led-running = &led_usr;
-               led-upgrade = &led_usr;
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               led_usr: usr {
-                       label = "ubnt:yellow:usr";
-                       gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
-               };
-       };
-
-       keys {
-               compatible = "gpio-keys";
-
-               reset {
-                       linux,code = <KEY_RESTART>;
-                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-                       debounce-interval = <60>;
-               };
-       };
-
-       gpio_spi {
-               compatible = "spi-gpio";
-               #address-cells = <0x1>;
-               ranges;
-
-               sck-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
-               mosi-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
-               cs-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
-               num-chipselects = <1>;
-
-               gpio_hc595: gpio_spi@0 {
-                       compatible = "fairchild,74hc595";
-                       reg = <0>;
-                       registers-number = <2>;
-                       spi-max-frequency = <100000>;
-                       enable-gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
-
-                       gpio-controller;
-                       #gpio-cells = <2>;
-               };
-       };
-
        gpio-export {
                compatible = "gpio-export";
 
@@ -163,54 +108,6 @@
        };
 };
 
-&spi {
-       status = "okay";
-
-       num-cs = <1>;
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <25000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               reg = <0x000000 0x040000>;
-                               label = "u-boot";
-                               read-only;
-                       };
-
-                       partition@40000 {
-                               reg = <0x040000 0x010000>;
-                               label = "u-boot-env";
-                               read-only;
-                       };
-
-                       partition@50000 {
-                               compatible = "denx,uimage";
-                               reg = <0x050000 0x760000>;
-                               label = "firmware";
-                       };
-
-                       partition@7b0000 {
-                               reg = <0x7b0000 0x040000>;
-                               label = "cfg";
-                               read-only;
-                       };
-
-                       art: partition@7f0000 {
-                               reg = <0x7f0000 0x010000>;
-                               label = "art";
-                               read-only;
-                       };
-               };
-       };
-};
-
 &mdio0 {
        status = "okay";
 
@@ -278,29 +175,6 @@
        };
 };
 
-&usb_phy {
-       status = "okay";
-};
-
-&usb {
-       #address-cells = <1>;
-       #size-cells = <0>;
-       status = "okay";
-
-       hub_port: port@1 {
-               reg = <1>;
-               #trigger-source-cells = <0>;
-       };
-};
-
-&pcie {
-       status = "okay";
-};
-
-&uart {
-       status = "okay";
-};
-
 &eth0 {
        status = "okay";
 
@@ -314,9 +188,3 @@
                full-duplex;
        };
 };
-
-&eth1 {
-       status = "okay";
-
-       mtd-mac-address = <&art 0x6>;
-};