ar71xx/image: allow builds of loader without cmdline injecting

On most platforms the cmdline is supplied by the loader to the kernel.
When using an elf loader with cmdline the size is bloated by 512k.
For loader-elf platforms like the cpe510 better use loader-elf but patch
the cmdline into the kernel.

wdr1043: Tested loader still works using sysupgade image.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49080 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index 0c8aaa2bfe07fca5db3f9d6b1452696b4a5c30dd..507d7506e59c5a9142fb5bce3d8a1c21bad8c2fe 100644 (file)
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -78,7 +78,7 @@ define Build/loader-common
        $(MAKE) -C lzma-loader \
                PKG_BUILD_DIR="$@.src" \
                TARGET_DIR="$(dir $@)" LOADER_NAME="$(notdir $@)" \
-               KERNEL_CMDLINE="$(CMDLINE)" BOARD="$(BOARDNAME)" \
+               BOARD="$(BOARDNAME)" \
                LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
                $(1) compile loader.$(LOADER_TYPE)
        mv "$@.$(LOADER_TYPE)" "$@"
@@ -86,13 +86,17 @@ define Build/loader-common
 endef
 
 define Build/loader-okli-compile
-       $(call Build/loader-common,FLASH_OFFS=$(LOADER_FLASH_OFFS) FLASH_MAX=0)
+       $(call Build/loader-common,FLASH_OFFS=$(LOADER_FLASH_OFFS) FLASH_MAX=0 KERNEL_CMDLINE="$(CMDLINE)")
 endef
 
 define Build/loader-kernel
        $(call Build/loader-common,LOADER_DATA="$@")
 endef
 
+define Build/loader-kernel-cmdline
+       $(call Build/loader-common,LOADER_DATA="$@" KERNEL_CMDLINE="$(CMDLINE)")
+endef
+
 define Build/loader-okli
        dd if=$(KDIR)/loader-$(1).gz bs=7680 conv=sync of="$@.new"
        cat "$@" >> "$@.new"
@@ -278,7 +282,7 @@ $(Device/tplink)
   COMPILE := loader-$(1).gz
   COMPILE/loader-$(1).gz := loader-okli-compile
   KERNEL := copy-file $(KDIR)/vmlinux.bin.lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1)
-  KERNEL_INITRAMFS := copy-file $(KDIR)/vmlinux-initramfs.bin.lzma | loader-kernel | mktplinkfw-initramfs
+  KERNEL_INITRAMFS := copy-file $(KDIR)/vmlinux-initramfs.bin.lzma | loader-kernel-cmdline | mktplinkfw-initramfs
 endef
 
 define Device/tplink-4m