From d5df4c3d39c6c0bce96225fca6ff5a2b4d6db521 Mon Sep 17 00:00:00 2001 From: thepeople Date: Fri, 12 Feb 2010 01:40:57 +0000 Subject: [PATCH] [tools/wrt350nv2-builder] Update to v2.1 Stays closer to the stock firmware by using wrt350n.bin for the created image. Adds the possibility to create the image in two separate steps (-b / -z). Makefiles now support the possibility to include a u-boot image for a 100%-stock-like image. Signed off by: Matthias Buecher git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19596 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- target/linux/orion/image/Makefile | 18 +- tools/wrt350nv2-builder/Makefile | 10 +- .../wrt350nv2-builder/src/wrt350nv2-builder.c | 206 ++++++++++-------- 3 files changed, 130 insertions(+), 104 deletions(-) diff --git a/target/linux/orion/image/Makefile b/target/linux/orion/image/Makefile index c6c790ffb..9577cd9a9 100644 --- a/target/linux/orion/image/Makefile +++ b/target/linux/orion/image/Makefile @@ -1,5 +1,5 @@ # -# Copyright (C) 2008-2009 OpenWrt.org +# Copyright (C) 2008-2010 OpenWrt.org # # This is free software, licensed under the GNU General Public License v2. # See /LICENSE for more information. @@ -61,14 +61,18 @@ define Image/Build/Linksys # create parameter file echo ":kernel $5 ${BIN_DIR}/openwrt-$2-uImage" >"${TMP_DIR}/$2_webupgrade/$2.par" echo ":rootfs 0 ${KDIR}/root.$1" >>"${TMP_DIR}/$2_webupgrade/$2.par" -# create webupgrade image + [ ! -f "$(STAGING_DIR_HOST)/share/wrt350nv2-builder/u-boot.bin" ] || ( \ + echo ":u-boot 0 $(STAGING_DIR_HOST)/share/wrt350nv2-builder/u-boot.bin" >>"${TMP_DIR}/$2_webupgrade/$2.par"; ) +# create bin file for recovery and webupgrade image ( cd "${TMP_DIR}/$2_webupgrade"; \ "${STAGING_DIR_HOST}/bin/$2-builder" \ - -v "${TMP_DIR}/$2_webupgrade/$2.par" \ - "${BIN_DIR}/openwrt-$2-$1-webupgrade.img"; \ + -v -b "${TMP_DIR}/$2_webupgrade/$2.par"; \ ) # copy bin file as recovery image - $(CP) "${TMP_DIR}/$2_webupgrade/openwrt-$2-$1-webupgrade.bin" "$(BIN_DIR)/openwrt-$2-$1-recovery.bin" + $(CP) "${TMP_DIR}/$2_webupgrade/wrt350n.bin" "$(BIN_DIR)/openwrt-$2-$1-recovery.bin" +# create webupgrade image for stock firmware update mechanism + zip "${TMP_DIR}/$2_webupgrade/wrt350n.zip" "${TMP_DIR}/$2_webupgrade/wrt350n.bin" + "${STAGING_DIR_HOST}/bin/$2-builder" -v -z "${TMP_DIR}/$2_webupgrade/wrt350n.zip" "${BIN_DIR}/openwrt-$2-$1-webupgrade.img" rm -rf "${TMP_DIR}/$2_webupgrade" endef @@ -85,8 +89,10 @@ endef define Image/Build $(call Image/Build/$(1),$(1)) $(call Image/Build/Netgear,$(1),wnr854t,NG_WNR854T,$(1)) - $(call Image/Build/Linksys,$(1),wrt350nv2,WNR350Nv2,$(1),1048576) # 5th parameter is kernel mtd size 0x00100000 = 1048576 / 0x001A0000 = 1703936 $(call Image/Build/Freecom,$(1),dt2,DT,$(1)) +# Leave WRT350Nv2 at last position due to webimage dependency for zip +# 5th parameter is kernel mtd size, e.g. 0x00100000 = 1048576 or 0x001A0000 = 1703936 + $(call Image/Build/Linksys,$(1),wrt350nv2,WNR350Nv2,$(1),1048576) endef define Image/Build/squashfs diff --git a/tools/wrt350nv2-builder/Makefile b/tools/wrt350nv2-builder/Makefile index 648dd84db..b07f511f0 100644 --- a/tools/wrt350nv2-builder/Makefile +++ b/tools/wrt350nv2-builder/Makefile @@ -1,5 +1,5 @@ # -# Copyright (C) 2006-2009 OpenWrt.org +# Copyright (C) 2006-2010 OpenWrt.org # # This is free software, licensed under the GNU General Public License v2. # See /LICENSE for more information. @@ -8,7 +8,7 @@ include $(TOPDIR)/rules.mk PKG_NAME:=wrt350nv2-builder -PKG_VERSION:=2.0 +PKG_VERSION:=2.1 HOST_BUILD_DIR:=$(BUILD_DIR_HOST)/${PKG_NAME}-$(PKG_VERSION) @@ -24,10 +24,16 @@ endef define Host/Install $(INSTALL_DIR) $(STAGING_DIR_HOST)/bin $(INSTALL_BIN) $(HOST_BUILD_DIR)/wrt350nv2-builder $(STAGING_DIR_HOST)/bin/ +# optionally the builder can add a u-boot binary to create a complete webupgrade image, but this is not mandatory +# u-boot images from stock firmware are available at ftp://ftp.maddes.net/openwrt/kamikaze/orion/stock/binaries/ + [ ! -f "files/u-boot.bin" ] || ( \ + $(INSTALL_DIR) $(STAGING_DIR_HOST)/share/wrt350nv2-builder; \ + $(CP) files/u-boot.bin $(STAGING_DIR_HOST)/share/wrt350nv2-builder/; ) endef define Host/Clean rm -f $(STAGING_DIR_HOST)/bin/wrt350nv2-builder + rm -f $(STAGING_DIR_HOST)/share/wrt350nv2-builder endef $(eval $(call HostBuild)) diff --git a/tools/wrt350nv2-builder/src/wrt350nv2-builder.c b/tools/wrt350nv2-builder/src/wrt350nv2-builder.c index 36932863a..68001188b 100644 --- a/tools/wrt350nv2-builder/src/wrt350nv2-builder.c +++ b/tools/wrt350nv2-builder/src/wrt350nv2-builder.c @@ -1,8 +1,8 @@ /* - WRT350Nv2-Builder 2.0 (previously called buildimg) + WRT350Nv2-Builder 2.1 (previously called buildimg) Copyright (C) 2008-2009 Dirk Teurlings - Copyright (C) 2009 Matthias Buecher (http://www.maddes.net/) + Copyright (C) 2009-2010 Matthias Buecher (http://www.maddes.net/) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -36,18 +36,19 @@ 1 wrt350nv2.par parameter file describing the image layout 2 wrt350nv2.img output file for linksys style image - An u-boot image inside the bin file is not necessary. + A u-boot image inside the bin file is not necessary. The version is not important. - The name of the bin file is not important. + The name of the bin file is not important, but still "wrt350n.bin" is used to + keep as close as possible to the stock firmware. Linksys assumes that no mtd will be used to its maximum, so the last 16 bytes of the mtd are abused to define the length of the next mtd content (4 bytes for size + 12 pad bytes). - At the end of "rootfs" additional 16 bytes are abused for some data and an + At the end of "rootfs" additional 16 bytes are abused for some data and a highly important eRcOmM identifier, so the last 32 bytes of "rootfs" are abused. - At the end of "u-boot" 128 bytes are abused for some data, a checksum and an + At the end of "u-boot" 128 bytes are abused for some data, a checksum and a highly important sErCoMm identifier. @@ -82,7 +83,7 @@ // version info -#define VERSION "2.0" +#define VERSION "2.1" char program_info[] = "WRT350Nv2-Builder v%s by Dirk Teurlings and Matthias Buecher (http://www.maddes.net/)\n"; // verbosity @@ -105,7 +106,8 @@ mtd_info mtd_rootfs = { "rootfs", 0, 0, NULL, 0L, { 0, 0 } }; mtd_info mtd_uboot = { "u-boot", 0, 0, NULL, 0L, { 0, 0 } }; #define ROOTFS_END_OFFSET 0x00760000 -#define ROOTFS_MIN_OFFSET 0x00700000 // should be filled up to here, to make sure that the zip file is big enough to pass the size check of the stock firmware +#define ROOTFS_MIN_OFFSET 0x00640000 // should be filled up to here, to make sure that the zip file is big enough to pass the size check of the stock firmware + // 2.0.17: filled up to 0x00640000, 2.0.19: filled up to 0x0670000 // rootfs statics via: hexdump -v -e '1/1 "0x%02X, "' -s 0x0075FFE0 -n 16 "wrt350n.bin" ; echo -en "\n" unsigned char product_id[] = { 0x00, 0x03 }; // seems to be a fixed value @@ -203,17 +205,17 @@ int parse_par_file(FILE *f_par) { // read next line into memory do { // allocate memory for input line - if (buffer == NULL) { + if (!buffer) { buffer = malloc(buffer_size); } - if (buffer == NULL) { + if (!buffer) { exitcode = 1; printf("parse_par_file: can not allocate %i bytes\n", (int) buffer_size); break; } line = fgets(buffer, buffer_size, f_par); - if (line == NULL) { + if (!line) { exitcode = ferror(f_par); if (exitcode) { printf("parse_par_file: %s\n", strerror(exitcode)); @@ -243,7 +245,7 @@ int parse_par_file(FILE *f_par) { buffer_size *= 2; lprintf(DEBUG_LVL2, " extending buffer to %i bytes\n", buffer_size); } while (1); - if (line == NULL || exitcode) { + if ((!line) || (exitcode)) { break; } @@ -262,17 +264,17 @@ int parse_par_file(FILE *f_par) { printf("line %i does not meet defined format (: )\n", lineno); } else { // populate mtd_info if supported mtd names - if (strcmp(string1, mtd_kernel.name) == 0) { + if (!strcmp(string1, mtd_kernel.name)) { mtd = &mtd_kernel; - } else if (strcmp(string1, mtd_rootfs.name) == 0) { + } else if (!strcmp(string1, mtd_rootfs.name)) { mtd = &mtd_rootfs; - } else if (strcmp(string1, mtd_uboot.name) == 0) { + } else if (!strcmp(string1, mtd_uboot.name)) { mtd = &mtd_uboot; } - if (mtd == NULL) { + if (!mtd) { printf("unknown mtd %s in line %i\n", string1, lineno); - } else if (mtd->filename != NULL) { + } else if (mtd->filename) { f_exitcode = 1; printf("mtd %s in line %i multiple definitions\n", string1, lineno); } else { @@ -281,7 +283,7 @@ int parse_par_file(FILE *f_par) { // Get file size f_in = fopen(mtd->filename, "rb"); - if (f_in == NULL) { + if (!f_in) { f_exitcode = errno; printf("input file %s: %s\n", mtd->filename, strerror(f_exitcode)); } else { @@ -320,7 +322,7 @@ int parse_par_file(FILE *f_par) { if (count != 2) { printf("line %i does not meet defined format (: \n", lineno); } else { - if (strcmp(string1, "version") == 0) { + if (!strcmp(string1, "version")) { // changing version fw_version[0] = 0x000000FF & ( value >> 8 ); fw_version[1] = 0x000000FF & value; @@ -337,9 +339,8 @@ int parse_par_file(FILE *f_par) { printf("line %i does not meet defined format (: )\n", lineno); } else { /* - if (strcmp(string1, "something") == 0) { - something = string2; - string2 = NULL; // do not free + if (!strcmp(string1, "something")) { + something = strdup(string2); } else { */ printf("unknown string variable %s in line %i\n", string1, lineno); @@ -382,7 +383,7 @@ int create_bin_file(char *bin_filename) { // allocate memory for bin file buffer = malloc(KERNEL_CODE_OFFSET + FLASH_SIZE); - if (buffer == NULL) { + if (!buffer) { exitcode = 1; printf("create_bin_file: can not allocate %i bytes\n", FLASH_SIZE); } else { @@ -415,10 +416,10 @@ int create_bin_file(char *bin_filename) { printf("create_bin_file: unknown mtd %i\n", i); break; } - if (mtd == NULL) { + if (!mtd) { break; } - if (mtd->filename == NULL) { + if (!mtd->filename) { continue; } @@ -434,7 +435,7 @@ int create_bin_file(char *bin_filename) { // adding file content f_in = fopen(mtd->filename, "rb"); - if (f_in == NULL) { + if (!f_in) { exitcode = errno; printf("input file %s: %s\n", mtd->filename, strerror(exitcode)); } else { @@ -461,7 +462,7 @@ int create_bin_file(char *bin_filename) { lprintf(DEBUG, " padding offset 0x%08X length 0x%08X\n", addsize, padsize); f_in = fopen(rand_filename, "rb"); - if (f_in == NULL) { + if (!f_in) { exitcode = errno; printf("input file %s: %s\n", rand_filename, strerror(exitcode)); } else { @@ -514,7 +515,7 @@ int create_bin_file(char *bin_filename) { if (!exitcode) { lprintf(DEBUG, "writing file %s\n", bin_filename); f_out = fopen(bin_filename, "wb"); - if (f_out == NULL) { + if (!f_out) { exitcode = errno; printf("output file %s: %s\n", bin_filename, strerror(exitcode)); } else { @@ -547,18 +548,18 @@ int create_zip_file(char *zip_filename, char *bin_filename) { buffer = NULL; do { // allocate memory for command line - if (buffer == NULL) { + if (!buffer) { buffer = malloc(buffer_size); } - if (buffer == NULL) { + if (!buffer) { exitcode = 1; printf("create_zip_file: can not allocate %i bytes\n", (int) buffer_size); break; } // if buffer was not completely filled, then line fit in completely - count = snprintf(buffer, buffer_size, "zip %s %s", zip_filename, bin_filename); - if (count > -1 && count < buffer_size) { + count = snprintf(buffer, buffer_size, "zip \"%s\" \"%s\"", zip_filename, bin_filename); + if ((count > -1) && (count < buffer_size)) { break; } @@ -577,7 +578,7 @@ int create_zip_file(char *zip_filename, char *bin_filename) { // zipping binfile lprintf(DEBUG, "%s\n", buffer); count = system(buffer); - if (count < 0 || WEXITSTATUS(count)) { + if ((count < 0) || (WEXITSTATUS(count))) { exitcode = 1; printf("create_zip_file: can not execute %s bytes\n", buffer); } @@ -624,7 +625,7 @@ int create_img_file(FILE *f_out, char *out_filename, char *zip_filename) { if (!exitcode) { lprintf(DEBUG_LVL2, " adding zip file\n"); f_in = fopen(zip_filename, "rb"); - if (f_in == NULL) { + if (!f_in) { exitcode = errno; printf("input file %s: %s\n", zip_filename, strerror(exitcode)); } else { @@ -696,16 +697,17 @@ int main(int argc, char *argv[]) { int exitcode = 0; int help; + int onlybin; int havezip; char option; char *par_filename = NULL; - char *out_filename = NULL; + char *img_filename = NULL; char *base_filename = NULL; char *bin_filename = NULL; char *zip_filename = NULL; - FILE *f_par; - FILE *f_out; + FILE *f_par = NULL; + FILE *f_img = NULL; int i; mtd_info *mtd; @@ -722,19 +724,23 @@ int main(int argc, char *argv[]) { // command line processing // options help = 0; + onlybin = 0; havezip = 0; - while ((option = getopt(argc, argv, ":hzf:v")) != -1) { + while ((option = getopt(argc, argv, ":hbzf:v")) != -1) { switch(option) { case 'h': help = 1; break; + case 'b': + onlybin = 1; + break; case 'z': havezip = 1; break; case 'f': sizecheck = sscanf(optarg, "%i", &i); if (sizecheck != 1) { - printf("firmware version of -f option not a valid integer\n"); + printf("Firmware version of -f option not a valid integer\n"); exitcode = 1; } else { fw_version[0] = 0x000000FF & ( i >> 8 ); @@ -757,7 +763,7 @@ int main(int argc, char *argv[]) { // files for ( ; optind < argc; optind++) { - if (par_filename == NULL) { + if (!par_filename) { par_filename = argv[optind]; if (access(par_filename, R_OK)) { @@ -772,12 +778,12 @@ int main(int argc, char *argv[]) { continue; } - if (out_filename == NULL) { - out_filename = argv[optind]; + if ((!onlybin) && (!img_filename)) { + img_filename = argv[optind]; - if (!access(out_filename, F_OK)) { // if file already exists then check write access - if (access(out_filename, W_OK)) { - printf("No write access to output file %s\n", out_filename); + if (!access(img_filename, F_OK)) { // if file already exists then check write access + if (access(img_filename, W_OK)) { + printf("No write access to image file %s\n", img_filename); exitcode = 1; } } @@ -791,7 +797,7 @@ int main(int argc, char *argv[]) { } // file name checks - if (par_filename == NULL) { + if (!par_filename) { if (havezip) { printf("Zip file not stated\n"); } else { @@ -800,7 +806,7 @@ int main(int argc, char *argv[]) { exitcode = 1; } else { base_filename = basename(par_filename); - if (base_filename == NULL) { + if (!base_filename) { if (havezip) { printf("Zip file is a directory\n"); } else { @@ -810,33 +816,35 @@ int main(int argc, char *argv[]) { } } - if (out_filename == NULL) { - printf("Output file not stated\n"); - exitcode = 1; - } else { - base_filename = basename(out_filename); - if (base_filename == NULL) { - printf("Output file is a directory\n"); + if (!onlybin) { + if (!img_filename) { + printf("Image file not stated\n"); exitcode = 1; } else { - base_filename = strdup(base_filename); - zip_filename = strrchr(base_filename, '.'); - if (zip_filename != NULL) { - zip_filename[0] = 0; - zip_filename = NULL; // clean up + base_filename = basename(img_filename); + if (!base_filename) { + printf("Image file is a directory\n"); + exitcode = 1; } } } - // react on parameter problems or help request, and exit - if ((exitcode != 0) || help) { + // check for mutually exclusive options + if ((onlybin) && (havezip)) { + printf("Option -b and -z are mutually exclusive\n"); + exitcode = 1; + } + + // react on option problems or help request, then exit + if ((exitcode) || (help)) { if (help) { printf("This program creates Linksys style images for the WRT350Nv2 router.\n"); } printf(" Usage:\n\ - %s [-h] [-z] [-f ] [-v] \n\n\ + %s [-h] [-b] [-z] [-f ] [-v] []\n\n\ Options:\n\ -h - Show this help\n\ + -b - Create only bin file, no img or zip file is created\n\ -z - Have zip file, the img file will be directly created from it\n\ -f - Wanted firmware version to use with -z\n\ Default firmware version is 0x2019 = 2.00.19.\n\ @@ -853,29 +861,37 @@ int main(int argc, char *argv[]) { par_filename = NULL; } - lprintf(DEBUG_LVL2, " verbosity: %i\n", verbosity); - lprintf(DEBUG_LVL2, " program: %s\n", argv[0]); + lprintf(DEBUG_LVL2, " Verbosity: %i\n", verbosity); + lprintf(DEBUG_LVL2, " Program: %s\n", argv[0]); - lprintf(DEBUG, "Parameter file: %s\n", par_filename); - lprintf(DEBUG, "Output file: %s\n", out_filename); - lprintf(DEBUG_LVL2, " basename: %s (%i)\n", base_filename, strlen(base_filename)); + if (par_filename) { + lprintf(DEBUG, "Parameter file: %s\n", par_filename); + } + if (zip_filename) { + lprintf(DEBUG, "Zip file: %s\n", zip_filename); + } + if (img_filename) { + lprintf(DEBUG, "Image file: %s\n", img_filename); + } // open files from command line - // parameter file - if (par_filename != NULL) { - f_par = fopen(par_filename, "r"); - if (f_par == NULL) { + // parameter/zip file + if (par_filename) { + f_par = fopen(par_filename, "rt"); + if (!f_par) { exitcode = errno; - printf("input file %s: %s\n", par_filename, strerror(exitcode)); + printf("Input file %s: %s\n", par_filename, strerror(exitcode)); } } - // output file - f_out = fopen(out_filename, "w"); - if (f_out == NULL) { - exitcode = errno; - printf("Output file %s: %s\n", out_filename, strerror(exitcode)); + // image file + if (img_filename) { + f_img = fopen(img_filename, "wb"); + if (!f_img) { + exitcode = errno; + printf("Output file %s: %s\n", img_filename, strerror(exitcode)); + } } if (exitcode) { @@ -884,20 +900,20 @@ int main(int argc, char *argv[]) { // parameter file processing - if (!exitcode && par_filename != NULL) { + if ((!exitcode) && (f_par)) { lprintf(DEBUG, "parsing parameter file...\n"); exitcode = parse_par_file(f_par); lprintf(DEBUG, "...done parsing file\n"); } - if (par_filename != NULL) { + if (f_par) { fclose(f_par); } // check all input data - if (!exitcode && par_filename != NULL) { + if ((!exitcode) && (par_filename)) { lprintf(DEBUG, "checking mtd data...\n"); for (i = 1; i <= 3; i++) { @@ -936,20 +952,20 @@ int main(int argc, char *argv[]) { printf("unknown mtd check %i\n", i); break; } - if (mtd == NULL) { + if (!mtd) { break; } lprintf(DEBUG_LVL2, " checking mtd %s\n", mtd->name); // general checks - if (mandatory && mtd->filename == NULL) { + if ((mandatory) && (!mtd->filename)) { exitcode = 1; printf("mtd %s not specified correctly or at all in parameter file\n", mtd->name); } // end checks if no file data present - if (mtd->filename == NULL) { + if (!mtd->filename) { continue; } @@ -960,7 +976,7 @@ int main(int argc, char *argv[]) { // general magic number check if (magic[0]) { - if (mtd->magic[0] != magic[0] || mtd->magic[1] != magic[1]) { + if ((mtd->magic[0] != magic[0]) || (mtd->magic[1] != magic[1])) { exitcode = 1; printf("mtd %s input file %s has wrong magic number (0x%02X%02X)\n", mtd->name, mtd->filename, mtd->magic[0], mtd->magic[1]); } @@ -992,10 +1008,8 @@ int main(int argc, char *argv[]) { // bin creation in memory - if (!exitcode && par_filename != NULL) { - // create bin name from basename - bin_filename = malloc(strlen(base_filename)+10); - sprintf(bin_filename, "%s.bin", base_filename); + if ((!exitcode) && (par_filename)) { + bin_filename = "wrt350n.bin"; lprintf(DEBUG, "creating bin file %s...\n", bin_filename); @@ -1004,12 +1018,9 @@ int main(int argc, char *argv[]) { lprintf(DEBUG, "...done creating bin file\n"); } - // zip file creation - if (!exitcode && zip_filename == NULL) { - // create zip name from basename - zip_filename = malloc(strlen(base_filename)+10); - sprintf(zip_filename, "%s.zip", base_filename); + if ((!exitcode) && (!onlybin) && (!zip_filename)) { + zip_filename = "wrt350n.zip"; lprintf(DEBUG, "creating zip file %s...\n", zip_filename); @@ -1020,15 +1031,18 @@ int main(int argc, char *argv[]) { // img file creation - if (!exitcode) { + if ((!exitcode) && (f_img)) { lprintf(DEBUG, "creating img file...\n"); - exitcode = create_img_file(f_out, out_filename, zip_filename); + exitcode = create_img_file(f_img, img_filename, zip_filename); lprintf(DEBUG, "...done creating img file\n"); } - fclose(f_out); +// clean up + if (f_img) { + fclose(f_img); + } // end program return exitcode; -- 2.35.1