From: juhosg Date: Mon, 10 Jan 2011 18:07:51 +0000 (+0000) Subject: backfire: ar71xx: Configure WNDR3700 switch LED colors properly (backport of r23879) X-Git-Url: http://git.ozo.com/?p=openwrt-10.03%2F.git;a=commitdiff_plain;h=89a59ff8b73ec9b722d89f2025db4ae600a27fc0 backfire: ar71xx: Configure WNDR3700 switch LED colors properly (backport of r23879) For WNDR3700, use green for 1Gb/s and amber for 100Mb/s and 10Mb/s on the four LAN port switch LEDs. The LEDs will be lit to indicate a link and will blink to indicate activity. This matches the stock firmware and the description printed on the label on the unit's underside. Signed-off-by: Mark Mentovai git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@24960 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- diff --git a/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network b/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network index eaf3fec7b..52260e74e 100644 --- a/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network +++ b/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network @@ -32,16 +32,16 @@ config switch_port # the switch and the section does not correspond to a real # switch port. # - # 0=LED off; 1=Collision/FDX; 2=Link/activity; 3-1000MB/s - # 4=100 MB/s; 5=10 MB/s; 6=1000 MB/s+activity; 7=100 MB/s+activity - # 8=10 MB/s+activity; 9=10/100 Mb/s+activity; 10: Fiber; + # 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s; + # 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity; + # 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber; # 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx); # 14: Link (master); 15: separate register - + option device rtl8366s option port 1 - option led 9 - + option led 6 + config switch_port # Port 2 controls the ORANGE configuration of LEDs for # the switch and the section does not correspond to a real @@ -52,8 +52,7 @@ config switch_port option device rtl8366s option port 2 - option led 6 - + option led 9 config switch_port # Port 5 controls the configuration of the WAN LED and the @@ -67,5 +66,4 @@ config switch_port option device rtl8366s option port 5 - option led 6 - + option led 2