From: blogic Date: Tue, 24 Jul 2007 22:40:24 +0000 (+0000) Subject: on the au1000 usb could never work as the power switch was never enabled :P X-Git-Url: http://git.ozo.com/?p=openwrt-10.03%2F.git;a=commitdiff_plain;h=87378c0dd01f5e45ad0ffcbadc506a966ab6a213 on the au1000 usb could never work as the power switch was never enabled :P git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8151 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- diff --git a/target/linux/au1000-2.6/patches/017-usb-power.patch b/target/linux/au1000-2.6/patches/017-usb-power.patch new file mode 100644 index 000000000..0bde1f9a3 --- /dev/null +++ b/target/linux/au1000-2.6/patches/017-usb-power.patch @@ -0,0 +1,16 @@ +diff -urN linux-2.6.22.1.orig/arch/mips/au1000/mtx-1/board_setup.c linux-2.6.22.1/arch/mips/au1000/mtx-1/board_setup.c +--- linux-2.6.22.1.orig/arch/mips/au1000/mtx-1/board_setup.c 2007-07-24 18:42:22.852011842 +0200 ++++ linux-2.6.22.1/arch/mips/au1000/mtx-1/board_setup.c 2007-07-25 00:39:37.797519773 +0200 +@@ -54,11 +54,10 @@ + + void __init board_setup(void) + { +-#ifdef CONFIG_USB_OHCI + // enable USB power switch ++ printk("mtx-1: turning on the usb power switch\n"); + au_writel( au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR ); + au_writel( 0x100000, GPIO2_OUTPUT ); +-#endif // defined (CONFIG_USB_OHCI) + + #ifdef CONFIG_PCI + #if defined(__MIPSEB__)