[xburst] jz4740_fb: Do not disable lcd clock during blanking. Only during

suspend.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19561 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/xburst/files-2.6.32/drivers/video/jz4740_fb.c b/target/linux/xburst/files-2.6.32/drivers/video/jz4740_fb.c
index 7aac458a3b5cda4665261bc89ceadba41bca670a..ec4fe6d18ee2e4efb0e376c9e7e711fd31d64317 100644 (file)
--- a/target/linux/xburst/files-2.6.32/drivers/video/jz4740_fb.c
+++ b/target/linux/xburst/files-2.6.32/drivers/video/jz4740_fb.c
@@ -167,12 +167,11 @@ int jzfb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue,
 static int jzfb_get_controller_bpp(struct jzfb *jzfb)
 {
        switch(jzfb->pdata->bpp) {
-               case 18:
-               case 24:
-                       return 32;
-                       break;
-               default:
-                       return jzfb->pdata->bpp;
+       case 18:
+       case 24:
+               return 32;
+       default:
+               return jzfb->pdata->bpp;
        }
 }
 
@@ -305,7 +304,7 @@ static int jzfb_set_par(struct fb_info *info)
 static int jzfb_blank(int blank_mode, struct fb_info *info)
 {
        struct jzfb* jzfb = info->par;
-       uint32_t ctrl = readl(jzfb->base + JZ_REG_LCD_CTRL);
+       uint32_t ctrl;
 
        switch (blank_mode) {
        case FB_BLANK_UNBLANK:
@@ -313,13 +312,13 @@ static int jzfb_blank(int blank_mode, struct fb_info *info)
                        return 0;
 
                jz_gpio_bulk_resume(jz_lcd_pins, ARRAY_SIZE(jz_lcd_pins));
-               clk_enable(jzfb->ldclk);
                clk_enable(jzfb->lpclk);
 
                writel(0, jzfb->base + JZ_REG_LCD_STATE);
 
                writel(jzfb->framedesc->next, jzfb->base + JZ_REG_LCD_DA0);
 
+               ctrl = readl(jzfb->base + JZ_REG_LCD_CTRL);
                ctrl |= JZ_LCD_CTRL_ENABLE;
                ctrl &= ~JZ_LCD_CTRL_DISABLE;
                writel(ctrl, jzfb->base + JZ_REG_LCD_CTRL);
@@ -330,6 +329,7 @@ static int jzfb_blank(int blank_mode, struct fb_info *info)
                if (!jzfb->is_enabled)
                        return 0;
 
+               ctrl = readl(jzfb->base + JZ_REG_LCD_CTRL);
                ctrl |= JZ_LCD_CTRL_DISABLE;
                writel(ctrl, jzfb->base + JZ_REG_LCD_CTRL);
                do {
@@ -337,7 +337,6 @@ static int jzfb_blank(int blank_mode, struct fb_info *info)
                } while (!(ctrl & JZ_LCD_STATE_DISABLED));
 
                clk_disable(jzfb->lpclk);
-               clk_disable(jzfb->ldclk);
                jz_gpio_bulk_suspend(jz_lcd_pins, ARRAY_SIZE(jz_lcd_pins));
                jzfb->is_enabled = 0;
                break;
@@ -511,6 +510,8 @@ static int __devinit jzfb_probe(struct platform_device *pdev)
 
        fb_alloc_cmap(&fb->cmap, 256, 0);
 
+       clk_enable(jzfb->ldclk);
+
        jzfb_set_par(fb);
        writel(jzfb->framedesc->next, jzfb->base + JZ_REG_LCD_DA0);
 
@@ -547,12 +548,44 @@ static int __devexit jzfb_remove(struct platform_device *pdev)
        return 0;
 }
 
+#ifdef CONFIG_PM
+
+static int jzfb_suspend(struct device *dev)
+{
+       struct jzfb *jzfb = dev_get_drvdata(dev);
+       clk_disable(jzfb->ldclk);
+
+       return 0;
+}
+
+static int jzfb_resume(struct device *dev)
+{
+       struct jzfb *jzfb = dev_get_drvdata(dev);
+       clk_enable(jzfb->ldclk);
+
+       return 0;
+}
+
+static const struct dev_pm_ops jzfb_pm_ops = {
+       .suspend        = jzfb_suspend,
+       .resume         = jzfb_resume,
+       .poweroff       = jzfb_suspend,
+       .restore        = jzfb_resume,
+};
+
+#define JZFB_PM_OPS (&jzfb_pm_ops)
+
+#else
+#define JZFB_PM_OPS NULL
+#endif
+
 static struct platform_driver jzfb_driver = {
        .probe = jzfb_probe,
        .remove = __devexit_p(jzfb_remove),
 
        .driver = {
                .name = "jz4740-fb",
+               .pm = JZFB_PM_OPS,
        },
 };