X-Git-Url: http://git.ozo.com/?p=openwrt-10.03%2F.git;a=blobdiff_plain;f=README;h=2975e5ce6be88f376bb65b31bae5ca8de762ff13;hp=a92bc769b0ff165aefba125a74a2616f2c8d47e6;hb=5c7ea98dc1554402c6f4eb48f0bad50b38e48a25;hpb=5485cbb73e8acd1e1bc78829e371c60c395936d1

diff --git a/README b/README
index a92bc769b..2975e5ce6 100644
--- a/README
+++ b/README
@@ -3,18 +3,18 @@ This is the buildsystem for the OpenWrt Linux distribution
 Please use "make menuconfig" to configure your appreciated
 configuration for the toolchain and firmware.
 
-You need to have installed gcc, binutils, patch, bzip2, flex, bison,
+You need to have installed gcc, binutils, patch, bzip2, flex,
 make, gettext, pkg-config, unzip, libz-dev and libc headers.
 
 Simply running 'make' will build your firmware.
 It will download all sources, build the cross-compile toolchain, 
 the kernel and all choosen applications.
 
-You can use scripts/flash.sh for remotely updating your embedded system
-via tftp.
+You can use scripts/flashing/flash.sh for remotely updating your embedded
+system via tftp.
 
 The OpenWrt system is documented in docs/. You will need a LaTeX distribution
-to build the documentation. Type make -C docs/ to build the documentation.
+and the tex4ht package to build the documentation. Type make -C docs/ to build it.
 
 Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
 Cygwin will not be supported because of the lack of case sensitiveness.