enable a different pseudo-vlan mode in the marvell switch (uses a proprietary header...

[openwrt-10.03/.git] / target / linux / generic-2.6 / files / drivers / net / phy / mvswitch.h

diff --git a/target/linux/generic-2.6/files/drivers/net/phy/mvswitch.h b/target/linux/generic-2.6/files/drivers/net/phy/mvswitch.h
index b51e84a731267c7c214db291c985e69d43dcab86..81516b708b6585f0976b1174c97c410b3d3e4baf 100644 (file)
--- a/target/linux/generic-2.6/files/drivers/net/phy/mvswitch.h
+++ b/target/linux/generic-2.6/files/drivers/net/phy/mvswitch.h
@@ -9,6 +9,19 @@
 #ifndef __MVSWITCH_H
 #define __MVSWITCH_H
 
+#define MV_HEADER_SIZE 2
+#define MV_HEADER_PORTS_M      0x001f
+#define MV_HEADER_PORTS_S      0
+#define MV_HEADER_VLAN_M       0xf000
+#define MV_HEADER_VLAN_S       12
+
+#define MV_TRAILER_SIZE        4
+#define MV_TRAILER_PORTS_M     0x1f
+#define MV_TRAILER_PORTS_S     16
+#define MV_TRAILER_FLAGS_S     24
+#define MV_TRAILER_OVERRIDE    0x80
+
+
 #define MV_PORTS       5
 #define MV_WANPORT     4
 #define MV_CPUPORT     5
@@ -36,7 +49,7 @@ enum {
        MV_PHY_INTR_EN      = 0x12,
        MV_PHY_INTR_STATUS  = 0x13,
        MV_PHY_INTR_PORT    = 0x14,
-       MV_PHY_RECV_COUNTER = 0x15,
+       MV_PHY_RECV_COUNTER = 0x16,
        MV_PHY_LED_PARALLEL = 0x16,
        MV_PHY_LED_STREAM   = 0x17,
        MV_PHY_LED_CTRL     = 0x18,
@@ -64,6 +77,7 @@ enum {
        MV_PORTCTRL_ENABLED =  (3 << 0),
        MV_PORTCTRL_VLANTUN =  (1 << 7),        /* Enforce VLANs on packets */
        MV_PORTCTRL_RXTR    =  (1 << 8),        /* Enable Marvell packet trailer for ingress */
+       MV_PORTCTRL_HEADER      = (1 << 11),    /* Enable Marvell packet header mode for port */
        MV_PORTCTRL_TXTR    = (1 << 14),        /* Enable Marvell packet trailer for egress */
        MV_PORTCTRL_FORCEFL = (1 << 15),        /* force flow control */
 };
@@ -88,6 +102,17 @@ enum {
 };
 #define MV_SWITCHREG(_type) MV_SWITCHREGS, MV_SWITCH_##_type
 
+enum {
+       MV_SWITCHCTL_EEIE   =  (1 << 0),        /* EEPROM interrupt enable */
+       MV_SWITCHCTL_PHYIE  =  (1 << 1),        /* PHY interrupt enable */
+       MV_SWITCHCTL_ATUDONE=  (1 << 2),        /* ATU done interrupt enable */
+       MV_SWITCHCTL_ATUIE  =  (1 << 3),        /* ATU interrupt enable */
+       MV_SWITCHCTL_CTRMODE=  (1 << 8),        /* statistics for rx and tx errors */
+       MV_SWITCHCTL_RELOAD =  (1 << 9),        /* reload registers from eeprom */
+       MV_SWITCHCTL_MSIZE  = (1 << 10),        /* increase maximum frame size */
+       MV_SWITCHCTL_DROP   = (1 << 13),        /* discard frames with excessive collisions */
+};
+
 enum {
 #define MV_ATUCTL_AGETIME(_n)  ((((_n) / 16) & 0xff) << 4)
        MV_ATUCTL_ATU_256   = (0 << 12),