Fix Buffalo WBR-G54 and WBR-B11 support (updated patch)

[openwrt-10.03/.git] / target / linux / brcm-2.4 / base-files / etc / init.d / netconfig

diff --git a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
index 44e2de25c93cd7305da6c399ae262fdfb87bb06c..09c7c286fc9c4ce4f7a2961d88bb7d0157972015 100755 (executable)
--- a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
+++ b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
@@ -57,6 +57,12 @@ start() {
                        c["wan_ifname"] = ""
                        c["lan_ifname"] = "eth1"
                }
+               if (model == "ASUS WL-330gE") {
+                       c["wan_ifname"] = ""
+                       c["lan_ifname"] = "eth0"
+                       c["vlan0ports"] = ""
+                       c["vlan1ports"] = ""
+               }
                if (model == "ASUS WL-500g") {
                        c["wan_ifname"] = "eth1"
                        c["lan_ifname"] = "eth0"
@@ -107,6 +113,13 @@ start() {
                                }
                        }
                }
+               # Buffalo WBR-B11 and Buffalo WBR-G54
+               if (nvram["boardtype"] == "bcm94710ap") {
+                       c["vlan0ports"] = "0 1 2 3 4 5u"
+                       c["vlan1ports"] = ""
+                       c["lan_ifname"] = "eth0"
+                       c["wan_ifname"] = "eth1"
+               }
                if (nvram["boardtype"] == "0x478") {
                        # generic broadcom 4785 processor with 5397 switch?
                        c["vlan0ports"] = "1 2 3 4 8*"
@@ -149,12 +162,14 @@ start() {
                        c["vlan1ports"] = ""
                }
 
-               print "#### VLAN configuration "
-               print "config switch eth0"
-               p("vlan0", "vlan0ports")
-               p("vlan1", "vlan1ports")
-               print ""
-               print ""
+               if (c["vlan0ports"] || c["vlan1ports"]) {
+                       print "#### VLAN configuration "
+                       print "config switch eth0"
+                       p("vlan0", "vlan0ports")
+                       p("vlan1", "vlan1ports")
+                       print ""
+                       print ""
+               }
                print "#### Loopback configuration"
                print "config interface loopback"
                print " option ifname   \"lo\""
@@ -173,10 +188,16 @@ start() {
                print " option netmask  255.255.255.0"
                print ""
                print ""
-               print "#### WAN configuration"
-               print "config interface wan"
-               p("ifname", "wan_ifname")
-               p("macaddr", "wan_macaddr")
-               print " option proto    dhcp"
+               if (c["wan_ifname"]) {
+                       print "#### WAN configuration"
+                       print "config interface wan"
+                       p("ifname", "wan_ifname")
+                       p("macaddr", "wan_macaddr")
+                       print " option proto    dhcp"
+               } else {
+                       print "#### WAN configuration (disabled)"
+                       print "#config interface wan"
+                       print "#        option proto    dhcp"
+               }
        }' > /etc/config/network
 }