ar71xx: move USB host device support into a separate file
[openwrt-10.03/.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-wndr3700.c
index aee68cb9f8544484b2fd6639c9e7220fe762ab48..7cf8e315d170a3cf35fc209b98e5d01ea535b987 100644 (file)
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
+#include <linux/delay.h>
+#include <linux/rtl8366_smi.h>
 
 #include <asm/mips_machine.h>
 #include <asm/mach-ar71xx/ar71xx.h>
-#include <asm/mach-ar71xx/pci.h>
 
 #include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ap94-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
+
+#define WNDR3700_GPIO_LED_WPS_ORANGE   0
+#define WNDR3700_GPIO_LED_POWER_ORANGE 1
+#define WNDR3700_GPIO_LED_POWER_GREEN  2
+#define WNDR3700_GPIO_LED_WPS_GREEN    4
+
+#define WNDR3700_GPIO_BTN_WPS          3
+#define WNDR3700_GPIO_BTN_RESET                8
+#define WNDR3700_GPIO_BTN_WIFI         11
+
+#define WNDR3700_GPIO_RTL8366_SDA      5
+#define WNDR3700_GPIO_RTL8366_SCK      7
+
+#define WNDR3700_BUTTONS_POLL_INTERVAL    20
+
+#define WNDR3700_WMAC0_MAC_OFFSET      0
+#define WNDR3700_WMAC1_MAC_OFFSET      0xc
+#define WNDR3700_CALDATA0_OFFSET       0x1000
+#define WNDR3700_CALDATA1_OFFSET       0x5000
 
 #ifdef CONFIG_MTD_PARTITIONS
 static struct mtd_partition wndr3700_partitions[] = {
@@ -78,40 +101,76 @@ static struct flash_platform_data wndr3700_flash_data = {
 #endif
 };
 
-static struct ar71xx_pci_irq wndr3700_pci_irqs[] __initdata = {
+static struct gpio_led wndr3700_leds_gpio[] __initdata = {
        {
-               .slot   = 0,
-               .pin    = 1,
-               .irq    = AR71XX_PCI_IRQ_DEV0,
+               .name           = "wndr3700:green:power",
+               .gpio           = WNDR3700_GPIO_LED_POWER_GREEN,
+               .active_low     = 1,
+       }, {
+               .name           = "wndr3700:orange:power",
+               .gpio           = WNDR3700_GPIO_LED_POWER_ORANGE,
+               .active_low     = 1,
        }, {
-               .slot   = 1,
-               .pin    = 1,
-               .irq    = AR71XX_PCI_IRQ_DEV1,
+               .name           = "wndr3700:green:wps",
+               .gpio           = WNDR3700_GPIO_LED_WPS_GREEN,
+               .active_low     = 1,
+       }, {
+               .name           = "wndr3700:orange:wps",
+               .gpio           = WNDR3700_GPIO_LED_WPS_ORANGE,
+               .active_low     = 1,
        }
 };
 
-static struct spi_board_info wndr3700_spi_info[] = {
+static struct gpio_button wndr3700_gpio_buttons[] __initdata = {
        {
-               .bus_num        = 0,
-               .chip_select    = 0,
-               .max_speed_hz   = 25000000,
-               .modalias       = "m25p80",
-               .platform_data  = &wndr3700_flash_data,
+               .desc           = "reset",
+               .type           = EV_KEY,
+               .code           = BTN_0,
+               .threshold      = 5,
+               .gpio           = WNDR3700_GPIO_BTN_RESET,
+       }, {
+               .desc           = "wps",
+               .type           = EV_KEY,
+               .code           = BTN_1,
+               .threshold      = 5,
+               .gpio           = WNDR3700_GPIO_BTN_WPS,
+       } , {
+               .desc           = "wifi",
+               .type           = EV_KEY,
+               .code           = BTN_2,
+               .threshold      = 5,
+               .gpio           = WNDR3700_GPIO_BTN_WIFI,
+       }
+};
+
+static struct rtl8366_smi_platform_data wndr3700_rtl8366_smi_data = {
+       .gpio_sda        = WNDR3700_GPIO_RTL8366_SDA,
+       .gpio_sck        = WNDR3700_GPIO_RTL8366_SCK,
+};
+
+static struct platform_device wndr3700_rtl8366_smi_device = {
+       .name           = "rtl8366-smi",
+       .id             = -1,
+       .dev = {
+               .platform_data  = &wndr3700_rtl8366_smi_data,
        }
 };
 
 static void __init wndr3700_setup(void)
 {
-       u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
+       u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
 
-       ar71xx_set_mac_base(mac);
-       ar71xx_add_device_mdio(0x0);
+       ar71xx_set_mac_base(art);
 
+       ar71xx_eth0_pll_data.pll_1000 = 0x11110000;
+       ar71xx_eth0_data.mii_bus_dev = &wndr3700_rtl8366_smi_device.dev;
        ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
        ar71xx_eth0_data.phy_mask = 0xf;
        ar71xx_eth0_data.speed = SPEED_1000;
        ar71xx_eth0_data.duplex = DUPLEX_FULL;
 
+       ar71xx_eth1_pll_data.pll_1000 = 0x11110000;
+       ar71xx_eth1_data.mii_bus_dev = &wndr3700_rtl8366_smi_device.dev;
        ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
        ar71xx_eth1_data.phy_mask = 0x10;
 
@@ -120,12 +179,22 @@ static void __init wndr3700_setup(void)
 
        ar71xx_add_device_usb();
 
-       ar71xx_pci_init(ARRAY_SIZE(wndr3700_pci_irqs), wndr3700_pci_irqs);
+       ar71xx_add_device_m25p80(&wndr3700_flash_data);
+
+        ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wndr3700_leds_gpio),
+                                   wndr3700_leds_gpio);
+
+       ar71xx_add_device_gpio_buttons(-1, WNDR3700_BUTTONS_POLL_INTERVAL,
+                                     ARRAY_SIZE(wndr3700_gpio_buttons),
+                                     wndr3700_gpio_buttons);
 
-       ar71xx_add_device_spi(NULL, wndr3700_spi_info,
-                             ARRAY_SIZE(wndr3700_spi_info));
+       platform_device_register(&wndr3700_rtl8366_smi_device);
+       platform_device_register_simple("wndr3700-led-usb", -1, NULL, 0);
 
-       /* TODO: LEDs, buttons support */
+       ap94_pci_init(art + WNDR3700_CALDATA0_OFFSET,
+                     art + WNDR3700_WMAC0_MAC_OFFSET,
+                     art + WNDR3700_CALDATA1_OFFSET,
+                     art + WNDR3700_WMAC1_MAC_OFFSET);
 }
 
 MIPS_MACHINE(AR71XX_MACH_WNDR3700, "NETGEAR WNDR3700", wndr3700_setup);