#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/rtl8366_smi.h>
#include <asm/mips_machine.h>
#include <asm/mach-ar71xx/ar71xx.h>
-#include <asm/mach-ar71xx/pci.h>
#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ap94-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
#define WNDR3700_GPIO_LED_WPS_ORANGE 0
#define WNDR3700_GPIO_LED_POWER_ORANGE 1
#define WNDR3700_GPIO_BTN_RESET 8
#define WNDR3700_GPIO_BTN_WIFI 11
+#define WNDR3700_GPIO_RTL8366_SDA 5
+#define WNDR3700_GPIO_RTL8366_SCK 7
+
#define WNDR3700_BUTTONS_POLL_INTERVAL 20
+#define WNDR3700_WMAC0_MAC_OFFSET 0
+#define WNDR3700_WMAC1_MAC_OFFSET 0xc
+#define WNDR3700_CALDATA0_OFFSET 0x1000
+#define WNDR3700_CALDATA1_OFFSET 0x5000
+
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition wndr3700_partitions[] = {
{
#endif
};
-static struct ar71xx_pci_irq wndr3700_pci_irqs[] __initdata = {
- {
- .slot = 0,
- .pin = 1,
- .irq = AR71XX_PCI_IRQ_DEV0,
- }, {
- .slot = 1,
- .pin = 1,
- .irq = AR71XX_PCI_IRQ_DEV1,
- }
-};
-
-static struct spi_board_info wndr3700_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p80",
- .platform_data = &wndr3700_flash_data,
- }
-};
-
static struct gpio_led wndr3700_leds_gpio[] __initdata = {
{
.name = "wndr3700:green:power",
}
};
+static struct rtl8366_smi_platform_data wndr3700_rtl8366_smi_data = {
+ .gpio_sda = WNDR3700_GPIO_RTL8366_SDA,
+ .gpio_sck = WNDR3700_GPIO_RTL8366_SCK,
+};
+
+static struct platform_device wndr3700_rtl8366_smi_device = {
+ .name = "rtl8366-smi",
+ .id = -1,
+ .dev = {
+ .platform_data = &wndr3700_rtl8366_smi_data,
+ }
+};
+
static void __init wndr3700_setup(void)
{
- u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- ar71xx_set_mac_base(mac);
- ar71xx_add_device_mdio(0x0);
+ ar71xx_set_mac_base(art);
+ ar71xx_eth0_pll_data.pll_1000 = 0x11110000;
+ ar71xx_eth0_data.mii_bus_dev = &wndr3700_rtl8366_smi_device.dev;
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth0_data.phy_mask = 0xf;
ar71xx_eth0_data.speed = SPEED_1000;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
+ ar71xx_eth1_pll_data.pll_1000 = 0x11110000;
+ ar71xx_eth1_data.mii_bus_dev = &wndr3700_rtl8366_smi_device.dev;
ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth1_data.phy_mask = 0x10;
ar71xx_add_device_usb();
- ar71xx_pci_init(ARRAY_SIZE(wndr3700_pci_irqs), wndr3700_pci_irqs);
-
- ar71xx_add_device_spi(NULL, wndr3700_spi_info,
- ARRAY_SIZE(wndr3700_spi_info));
+ ar71xx_add_device_m25p80(&wndr3700_flash_data);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wndr3700_leds_gpio),
wndr3700_leds_gpio);
ar71xx_add_device_gpio_buttons(-1, WNDR3700_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(wndr3700_gpio_buttons),
wndr3700_gpio_buttons);
+
+ platform_device_register(&wndr3700_rtl8366_smi_device);
+ platform_device_register_simple("wndr3700-led-usb", -1, NULL, 0);
+
+ ap94_pci_init(art + WNDR3700_CALDATA0_OFFSET,
+ art + WNDR3700_WMAC0_MAC_OFFSET,
+ art + WNDR3700_CALDATA1_OFFSET,
+ art + WNDR3700_WMAC1_MAC_OFFSET);
}
MIPS_MACHINE(AR71XX_MACH_WNDR3700, "NETGEAR WNDR3700", wndr3700_setup);