/*
- * $Id$
- *
* Copyright (C) 2006, 2007 OpenWrt.org
- *
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
- *
+ *
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
+ *
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#include <linux/types.h>
#include <linux/module.h>
#include <linux/delay.h>
+#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/version.h>
+#include <linux/vlynq.h>
+#include <linux/leds.h>
+
#include <asm/addrspace.h>
-#include <asm/io.h>
#include <asm/ar7/ar7.h>
#include <asm/ar7/gpio.h>
#include <asm/ar7/prom.h>
-#include <asm/ar7/vlynq.h>
struct plat_vlynq_data {
struct plat_vlynq_ops ops;
if ((result = ar7_gpio_enable(pdata->gpio_bit)))
goto out_enabled;
- if ((result = gpio_direction_output(pdata->gpio_bit)))
+ if ((result = gpio_direction_output(pdata->gpio_bit, 0)))
goto out_gpio_enabled;
- gpio_set_value(pdata->gpio_bit, 0);
mdelay(50);
gpio_set_value(pdata->gpio_bit, 1);
.flags = IORESOURCE_MEM,
.start = 0x10000000,
.end = 0x107fffff,
-};
+};
static struct resource cpmac_low_res[] = {
{
},
};
+static struct resource usb_res[] = {
+ {
+ .name = "regs",
+ .flags = IORESOURCE_MEM,
+ .start = AR7_REGS_USB,
+ .end = AR7_REGS_USB + 0xff,
+ },
+ {
+ .name = "irq",
+ .flags = IORESOURCE_IRQ,
+ .start = 32,
+ .end = 32,
+ },
+ {
+ .name = "mem",
+ .flags = IORESOURCE_MEM,
+ .start = 0x03400000,
+ .end = 0x034001fff,
+ },
+};
+
static struct physmap_flash_data physmap_flash_data = {
.width = 2,
};
.num_resources = 1,
};
+static u64 cpmac_dma_mask = DMA_32BIT_MASK;
static struct platform_device cpmac_low = {
.id = 0,
.name = "cpmac",
- .dev.platform_data = &cpmac_low_data,
+ .dev = {
+ .dma_mask = &cpmac_dma_mask,
+ .coherent_dma_mask = DMA_32BIT_MASK,
+ .platform_data = &cpmac_low_data,
+ },
.resource = cpmac_low_res,
.num_resources = ARRAY_SIZE(cpmac_low_res),
};
static struct platform_device cpmac_high = {
.id = 1,
.name = "cpmac",
- .dev.platform_data = &cpmac_high_data,
+ .dev = {
+ .dma_mask = &cpmac_dma_mask,
+ .coherent_dma_mask = DMA_32BIT_MASK,
+ .platform_data = &cpmac_high_data,
+ },
.resource = cpmac_high_res,
.num_resources = ARRAY_SIZE(cpmac_high_res),
};
*/
#if !defined(CONFIG_SERIAL_8250)
-static struct plat_serial8250_port uart0_data =
-{
+static struct plat_serial8250_port uart0_data = {
.mapbase = AR7_REGS_UART0,
.irq = AR7_IRQ_UART0,
.regshift = 2,
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
};
-static struct plat_serial8250_port uart1_data =
-{
+static struct plat_serial8250_port uart1_data = {
.mapbase = UR8_REGS_UART1,
.irq = AR7_IRQ_UART1,
.regshift = 2,
};
#endif
+static struct gpio_led default_leds[] = {
+ { .name = "status", .gpio = 8, .active_low = 1, },
+};
+
+static struct gpio_led fb_leds[] = {
+ { .name = "1", .gpio = 7, },
+ { .name = "2", .gpio = 13, .active_low = 1, },
+ { .name = "3", .gpio = 10, .active_low = 1, },
+ { .name = "4", .gpio = 12, .active_low = 1, },
+ { .name = "5", .gpio = 9, .active_low = 1, },
+};
+
+static struct gpio_led fb_fon_leds[] = {
+ { .name = "1", .gpio = 8, },
+ { .name = "2", .gpio = 3, .active_low = 1, },
+ { .name = "3", .gpio = 5, },
+ { .name = "4", .gpio = 4, .active_low = 1, },
+ { .name = "5", .gpio = 11, .active_low = 1, },
+};
+
+static struct gpio_led_platform_data ar7_led_data;
+
+static struct platform_device ar7_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &ar7_led_data,
+ }
+};
+
+static struct platform_device ar7_udc = {
+ .id = -1,
+ .name = "ar7_udc",
+ .resource = usb_res,
+ .num_resources = ARRAY_SIZE(usb_res),
+};
+
static inline unsigned char char2hex(char h)
{
switch (h) {
return res;
- // Only TNETD73xx have a second serial port
+ /* Only TNETD73xx have a second serial port */
if (ar7_has_second_uart()) {
uart_port[1].type = PORT_AR7;
uart_port[1].line = 1;
return res;
}
-#else // !CONFIG_SERIAL_8250
+#else /* !CONFIG_SERIAL_8250 */
uart_data[0].uartclk = ar7_bus_freq() / 2;
uart_data[1].uartclk = uart_data[0].uartclk;
- // Only TNETD73xx have a second serial port
- if (ar7_has_second_uart()) {
+ /* Only TNETD73xx have a second serial port */
+ if (ar7_has_second_uart())
uart.dev.platform_data = uart_data;
- }
res = platform_device_register(&uart);
if (res)
return res;
-#endif // CONFIG_SERIAL_8250
+#endif /* CONFIG_SERIAL_8250 */
res = platform_device_register(&physmap_flash);
if (res)
cpmac_get_mac(0, cpmac_low_data.dev_addr);
res = platform_device_register(&cpmac_low);
+ if (res)
+ return res;
+
+#warning FIXME: add model detection
+ ar7_led_data.num_leds = ARRAY_SIZE(default_leds);
+ ar7_led_data.leds = default_leds;
+ res = platform_device_register(&ar7_gpio_leds);
+ if (res)
+ return res;
+
+ res = platform_device_register(&ar7_udc);
return res;
}