adds lantiq packages/drivers

[openwrt-10.03/.git] / package / ltq-vmmc / Config.in

diff --git a/package/ltq-vmmc/Config.in b/package/ltq-vmmc/Config.in
new file mode 100644 (file)
index 0000000..691c60e
--- /dev/null
+++ b/package/ltq-vmmc/Config.in
@@ -0,0 +1,95 @@
+choice
+       prompt "device selection"
+       depends on PACKAGE_kmod-ltq-vmmc
+       default VOICE_CPE_VMMC_WITH_DEVICE_DANUBE
+       help
+               Select the target device.
+
+       config VOICE_CPE_VMMC_WITH_DEVICE_DANUBE
+               bool "Danube, Twinpass, Vinax"
+               depends on TARGET_lantiq_danube
+
+       config VOICE_CPE_VMMC_WITH_DEVICE_AR9
+               bool "AR9 family"
+               depends on TARGET_lantiq_ar9
+
+       config VOICE_CPE_VMMC_WITH_DEVICE_VR9
+               bool "VR9 family"
+               depends on TARGET_lantiq_vr9
+       
+       config VOICE_VMMC_WITH_DEVICE_FALCON
+               bool "FALC-ON"
+               depends on TARGET_lantiq_falcon
+
+endchoice
+
+choice
+       depends on PACKAGE_kmod-ltq-vmmc
+       prompt "FXS coefficients"
+       default LTQ_VOICE_CPE_VMMC_COEF_FALCON_ETSI
+       help
+               Select country specific FXS coefficient file.
+
+       config LTQ_VOICE_CPE_VMMC_COEF_FALCON_ETSI
+               bool "ETSI_T3R10: Vl:40V, Ic:25mA, Vid:25V, Vri:45Vrms, f:25Hz" 
+               help
+                 These coefficents contains a parameter set with line impedance Zr according to ETSI.
+
+                 T:   gain in transmit direction (attenuation 3dBr) [dBr]
+                 R:   gain in receive direction (attenuation 10dBr) [dBr]
+                 Vl:  on-hook voltage limit [V]
+                 Ic:  off-hook loop current [mA]
+                 Vid: low-power-standby voltage [V]
+                 Vri: ring voltage [v]
+                 f:   ring frequency [V]
+
+       config LTQ_VOICE_CPE_VMMC_COEF_FALCON_US600R
+               bool "USA_600R_T3R10: Vl:40V, Ic:25mA, Vid:25V, Vri:45V, f:20Hz"
+               help
+                 These coefficents contains a parameter set with line impedance e.g. for USA.
+ 
+                 T:   gain in transmit direction (attenuation 3dBr) [dBr]
+                 R:   gain in receive direction (attenuation 10dBr) [dBr]
+                 Vl:  on-hook voltage limit [V]
+                 Ic:  off-hook loop current [mA]
+                 Vid: low-power-standby voltage [V]
+                 Vri: ring voltage [v]
+                 f:   ring frequency [V]
+
+       config LTQ_VOICE_CPE_VMMC_COEF_FALCON_USE_CUSTOM_FILE
+               bool "Select own FXS coefficient file"
+endchoice
+
+config VOICE_CPE_VMMC_PMC
+       depends on (VOICE_CPE_VMMC_WITH_DEVICE_AR9 || VOICE_CPE_VMMC_WITH_DEVICE_VR9)
+       bool "Power Management Control support"
+       default n
+       help
+               Option to enable Power Management Control on AR9, VR9. Not supported for Danube.
+
+config VOICE_CPE_VMMC_DISABLE_DECT_NIBBLE_SWAP
+       bool "Disable DECT nibble swap"
+       depends on PACKAGE_kmod-ltq-vmmc
+       default n
+       help
+               Option to disable DECT nibble swap for COSIC modem (for backward compatibility only).
+
+config VOICE_CPE_VMMC_EVENT_LOGGER
+       depends on BROKEN
+       bool "Event logger support"
+       depends on PACKAGE_kmod-ltq-vmmc
+       default n
+       help
+               Option to enable details traces between drv_vmmc and the voice FW
+               - for debugging only
+               - requires package ifx-evtlog
+
+config VOICE_CPE_VMMC_MPS_HISTORY_SIZE
+       int "MPS history buffer in words (0<=size<=512)"
+       depends on PACKAGE_kmod-ltq-vmmc
+       default "128"
+       help
+               MPS history buffer (default=128 words, maximum=512 words, 0=disable)
+               To opimize the memory footprint in RAM, you might want to set the
+               buffer size to 0.
+