are also logged to the system console. Enable this option if you
wish to enable the 'dmesg' utility.
+config BUSYBOX_CONFIG_FEATURE_DMESG_PRETTY
+ bool "pretty dmesg output"
+ default y
+ depends on BUSYBOX_CONFIG_DMESG
+ help
+ If you wish to scrub the syslog level from the output, say 'Y' here.
+ The syslog level is a string prefixed to every line with the form "<#>".
+
+ With this option you will see:
+ # dmesg
+ Linux version 2.6.17.4 .....
+ BIOS-provided physical RAM map:
+ BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
+
+ Without this option you will see:
+ # dmesg
+ <5>Linux version 2.6.17.4 .....
+ <6>BIOS-provided physical RAM map:
+ <6> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
+
config BUSYBOX_CONFIG_FBSET
bool "fbset"
default n
if you wish to enable the 'fbset' utility.
config BUSYBOX_CONFIG_FEATURE_FBSET_FANCY
- bool " Turn on extra fbset options"
+ bool "Turn on extra fbset options"
default n
depends on BUSYBOX_CONFIG_FBSET
help
options.
config BUSYBOX_CONFIG_FEATURE_FBSET_READMODE
- bool " Turn on fbset readmode support"
+ bool "Turn on fbset readmode support"
default n
depends on BUSYBOX_CONFIG_FBSET
help
can be used to list and edit the set of partitions or BSD style
'disk slices' that are defined on a hard drive.
-config BUSYBOX_FDISK_SUPPORT_LARGE_DISKS
- bool
+config BUSYBOX_CONFIG_FDISK_SUPPORT_LARGE_DISKS
+ bool "support over 4GB disks"
default y
depends on BUSYBOX_CONFIG_FDISK
help
Enable this option to support large disks > 4GB.
config BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
- bool " Write support"
+ bool "Write support"
default n
depends on BUSYBOX_CONFIG_FDISK
help
disabled, you will only be able to view the partition table.
config BUSYBOX_CONFIG_FEATURE_AIX_LABEL
- bool " Support AIX disklabels"
+ bool "Support AIX disklabels"
default n
depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
help
Most people can safely leave this option disabled.
config BUSYBOX_CONFIG_FEATURE_SGI_LABEL
- bool " Support SGI disklabels"
+ bool "Support SGI disklabels"
default n
depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
help
Most people can safely leave this option disabled.
config BUSYBOX_CONFIG_FEATURE_SUN_LABEL
- bool " Support SUN disklabels"
+ bool "Support SUN disklabels"
default n
depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
help
Most people can safely leave this option disabled.
config BUSYBOX_CONFIG_FEATURE_OSF_LABEL
- bool " Support BSD disklabels"
+ bool "Support BSD disklabels"
default n
depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
help
and define and edit BSD disk slices.
config BUSYBOX_CONFIG_FEATURE_FDISK_ADVANCED
- bool " Support expert mode"
+ bool "Support expert mode"
default n
depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
help
depends on BUSYBOX_CONFIG_FSCK_MINIX || BUSYBOX_CONFIG_MKFS_MINIX
config BUSYBOX_CONFIG_FEATURE_MINIX2
- bool " Support Minix fs v2 (fsck_minix/mkfs_minix)"
+ bool "Support Minix fs v2 (fsck_minix/mkfs_minix)"
default n
depends on BUSYBOX_CONFIG_FSCK_MINIX || BUSYBOX_CONFIG_MKFS_MINIX
help
shutdown in the hardware clock, so the hardware will keep the
correct time when Linux is _not_ running.
-config BUSYBOX_CONFIG_FEATURE_HWCLOCK_LONGOPTIONS
- bool " Support long options (--hctosys,...)"
+config BUSYBOX_CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS
+ bool "Support long options (--hctosys,...)"
default n
- depends on BUSYBOX_CONFIG_HWCLOCK
+ depends on BUSYBOX_CONFIG_HWCLOCK && BUSYBOX_CONFIG_GETOPT_LONG
help
By default, the hwclock utility only uses short options. If you
are overly fond of its long options, such as --hctosys, --utc, etc)
then enable this option.
config BUSYBOX_CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS
- bool " Use FHS /var/lib/hwclock/adjtime"
+ bool "Use FHS /var/lib/hwclock/adjtime"
default n
depends on BUSYBOX_CONFIG_HWCLOCK
help
from sysfs.
config BUSYBOX_CONFIG_FEATURE_MDEV_CONF
- bool " Support /etc/mdev.conf"
+ bool "Support /etc/mdev.conf"
default n
depends on BUSYBOX_CONFIG_MDEV
help
That's device name (with regex match), uid:gid, and permissions.
- Optionally, that can be followed (on the same line) by an asterisk
- and a command line to run after creating the corresponding device(s),
- ala:
-
- hdc root:cdrom 660 *ln -s hdc cdrom
-
Config file parsing stops on the first matching line. If no config
entry is matched, devices are created with default 0:0 660. (Make
the last line match .* to override this.)
+config BUSYBOX_CONFIG_FEATURE_MDEV_EXEC
+ bool "Support command execution at device addition/removal"
+ default n
+ depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF
+ help
+ This adds support for an optional field to /etc/mdev.conf, consisting
+ of a special character and a command line to run after creating the
+ corresponding device(s) and before removing, ala:
+
+ hdc root:cdrom 660 *ln -s $MDEV cdrom
+
+ The $MDEV environment variable is set to the name of the device.
+
+ The special characters and their meanings are:
+ @ Run after creating the device.
+ $ Run before removing the device.
+ * Run both after creating and before removing the device.
+
+ Commands are executed via system() so you need /bin/sh, meaning you
+ probably want to select a default shell in the Shells menu.
+
config BUSYBOX_CONFIG_MKSWAP
bool "mkswap"
default n
Once you have created swap space using 'mkswap' you need to enable
the swap space using the 'swapon' utility.
+config BUSYBOX_CONFIG_FEATURE_MKSWAP_V0
+ bool "version 0 support"
+ default n
+ depends on BUSYBOX_CONFIG_MKSWAP
+# depends on MKSWAP && BUSYBOX_CONFIG_DEPRECATED
+ help
+ Enable support for the old v0 style.
+ If your kernel is older than 2.1.117, then v0 support is the
+ only option.
+
config BUSYBOX_CONFIG_MORE
bool "more"
- default y
+ default n
help
more is a simple utility which allows you to read text one screen
sized page at a time. If you want to read text that is larger than
any need to reading text files, you can leave this disabled.
config BUSYBOX_CONFIG_FEATURE_USE_TERMIOS
- bool " Use termios to manipulate the screen"
- default y
+ bool "Use termios to manipulate the screen"
+ default n
depends on BUSYBOX_CONFIG_MORE
help
This option allows utilities such as 'more' and 'top' to determine
the 'mount' utility.
config BUSYBOX_CONFIG_FEATURE_MOUNT_NFS
- bool " Support mounting NFS file systems"
+ bool "Support mounting NFS file systems"
default y
depends on BUSYBOX_CONFIG_MOUNT
+ depends on BUSYBOX_CONFIG_FEATURE_HAVE_RPC
+ select BUSYBOX_CONFIG_FEATURE_SYSLOG
help
- Enable mounting of NFS file systems.
+ Enable mounting of NFS file systems.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_CIFS
+ bool "Support mounting CIFS/SMB file systems"
+ default y
+ depends on BUSYBOX_CONFIG_MOUNT
+ help
+ Enable support for samba mounts.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_FLAGS
+ depends on BUSYBOX_CONFIG_MOUNT
+ bool "Support lots of -o flags in mount"
+ default y
+ help
+ Without this, mount only supports ro/rw/remount. With this, it
+ supports nosuid, suid, dev, nodev, exec, noexec, sync, async, atime,
+ noatime, diratime, nodiratime, loud, bind, move, shared, slave,
+ private, unbindable, rshared, rslave, rprivate, and runbindable.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_FSTAB
+ depends on BUSYBOX_CONFIG_MOUNT
+ bool "Support /etc/fstab and -a"
+ default y
+ help
+ Support mount all and looking for files in /etc/fstab.
config BUSYBOX_CONFIG_PIVOT_ROOT
bool "pivot_root"
also want to enable 'umount'.
config BUSYBOX_CONFIG_FEATURE_UMOUNT_ALL
- bool " umount -a option"
+ bool "umount -a option"
default y
depends on BUSYBOX_CONFIG_UMOUNT
help
depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
config BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP
- bool " Support loopback mounts"
+ bool "Support loopback mounts"
default y
depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
help
(If you don't want umount to free the loop device, use "umount -D".)
config BUSYBOX_CONFIG_FEATURE_MTAB_SUPPORT
- bool " Support for the old /etc/mtab file"
+ bool "Support for the old /etc/mtab file"
default n
depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
help
example a mount under chroot won't update it), can't handle modern
features like separate per-process filesystem namespaces, requires
that your /etc directory be writeable, tends to get easily confused
- by --bind or --move mounts, and so on. (In brief: avoid.)
+ by --bind or --move mounts, won't update if you rename a directory
+ that contains a mount point, and so on. (In brief: avoid.)
+
+ About the only reason to use this is if you've removed /proc from
+ your kernel.
endmenu
projects / openwrt-10.03 / .git / blobdiff