select BUSYBOX_CONFIG_HUSH
bool "hush"
-config BUSYBOX_CONFIG_FEATURE_SH_IS_LASH
- select BUSYBOX_CONFIG_LASH
- bool "lash"
+####config FEATURE_SH_IS_LASH
+#### select LASH
+#### bool "lash"
config BUSYBOX_CONFIG_FEATURE_SH_IS_MSH
select BUSYBOX_CONFIG_MSH
config BUSYBOX_CONFIG_ASH
bool "ash"
default y
- select BUSYBOX_CONFIG_TEST
help
Tha 'ash' shell adds about 60k in the default configuration and is
the most complete and most pedantically correct shell included with
comment "Ash Shell Options"
depends on BUSYBOX_CONFIG_ASH
+config BUSYBOX_CONFIG_ASH_BASH_COMPAT
+ bool "bash-compatible extensions"
+ default y
+ depends on BUSYBOX_CONFIG_ASH
+ help
+ Enable bash-conpatible extensions.
+
config BUSYBOX_CONFIG_ASH_JOB_CONTROL
bool "Job control"
default y
config BUSYBOX_CONFIG_ASH_MATH_SUPPORT_64
bool "Extend Posix math support to 64 bit"
- default n
+ default y
depends on BUSYBOX_CONFIG_ASH_MATH_SUPPORT
help
Enable 64-bit math support in the ash shell. This will make
config BUSYBOX_CONFIG_ASH_BUILTIN_ECHO
bool "Builtin version of 'echo'"
default y
- select BUSYBOX_CONFIG_ECHO
depends on BUSYBOX_CONFIG_ASH
help
- Enable support for echo, built in to ash.
+ Enable support for echo, builtin to ash.
+
+config BUSYBOX_CONFIG_ASH_BUILTIN_PRINTF
+ bool "Builtin version of 'printf'"
+ default y
+ depends on BUSYBOX_CONFIG_ASH
+ help
+ Enable support for printf, builtin to ash.
config BUSYBOX_CONFIG_ASH_BUILTIN_TEST
bool "Builtin version of 'test'"
default y
- select BUSYBOX_CONFIG_TEST
depends on BUSYBOX_CONFIG_ASH
help
- Enable support for test, built in to ash.
+ Enable support for test, builtin to ash.
config BUSYBOX_CONFIG_ASH_CMDCMD
bool "'command' command to override shell builtins"
config BUSYBOX_CONFIG_ASH_OPTIMIZE_FOR_SIZE
bool "Optimize for size instead of speed"
- default y
+ default n
depends on BUSYBOX_CONFIG_ASH
help
Compile ash for reduced size at the price of speed.
config BUSYBOX_CONFIG_ASH_EXPAND_PRMT
bool "Expand prompt string"
- default n
+ default y
depends on BUSYBOX_CONFIG_ASH
help
"PS#" may be contain volatile content, such as backquote commands.
config BUSYBOX_CONFIG_HUSH
bool "hush"
default n
- select BUSYBOX_CONFIG_TRUE
- select BUSYBOX_CONFIG_FALSE
- select BUSYBOX_CONFIG_TEST
help
hush is a very small shell (just 18k) and it has fairly complete
Bourne shell grammar. It even handles all the normal flow control
word ), arithmetic expansion, aliases, brace expansion, tilde
expansion, &> and >& redirection of stdout+stderr, etc.
+config BUSYBOX_CONFIG_HUSH_HELP
+ bool "help builtin"
+ default n
+ depends on BUSYBOX_CONFIG_HUSH
+ help
+ Enable help builtin in hush. Code size + ~1 kbyte.
+
+config BUSYBOX_CONFIG_HUSH_INTERACTIVE
+ bool "Interactive mode"
+ default n
+ depends on BUSYBOX_CONFIG_HUSH
+ help
+ Enable interactive mode (prompt and command editing).
+ Without this, hush simply reads and executes commands
+ from stdin just like a shell script from the file.
+ No prompt, no PS1/PS2 magic shell variables.
+
+config BUSYBOX_CONFIG_HUSH_JOB
+ bool "Job control"
+ default n
+ depends on BUSYBOX_CONFIG_HUSH_INTERACTIVE
+ help
+ Enable job control: Ctrl-Z backgrounds, Ctrl-C interrupts current
+ command (not entire shell), fg/bg builtins work. Without this option,
+ "cmd &" still works by simply spawning a process and immediately
+ prompting for next command (or executing next command in a script),
+ but no separate process group is formed.
+
+config BUSYBOX_CONFIG_HUSH_TICK
+ bool "Process substitution"
+ default n
+ depends on BUSYBOX_CONFIG_HUSH
+ help
+ Enable process substitution `command` and $(command) in hush.
+
+config BUSYBOX_CONFIG_HUSH_IF
+ bool "Support if/then/elif/else/fi"
+ default n
+ depends on BUSYBOX_CONFIG_HUSH
+ help
+ Enable if/then/elif/else/fi in hush.
+
+config BUSYBOX_CONFIG_HUSH_LOOPS
+ bool "Support for, while and until loops"
+ default n
+ depends on BUSYBOX_CONFIG_HUSH
+ help
+ Enable for, while and until loops in hush.
config BUSYBOX_CONFIG_LASH
bool "lash"
default n
- select BUSYBOX_CONFIG_TRUE
- select BUSYBOX_CONFIG_FALSE
- select BUSYBOX_CONFIG_TEST
+ select BUSYBOX_CONFIG_HUSH
help
- lash is the very smallest shell (adds just 10k) and it is quite
- usable as a command prompt, but it is not suitable for any but the
- most trivial scripting (such as an initrd that calls insmod a few
- times) since it does not understand any Bourne shell grammar. It
- does handle pipes, redirects, and job control though. Adding in
- command editing makes it a very nice lightweight command prompt.
-
+ lash is deprecated and will be removed, please migrate to hush.
config BUSYBOX_CONFIG_MSH
bool "msh"
default n
- select BUSYBOX_CONFIG_TRUE
- select BUSYBOX_CONFIG_FALSE
- select BUSYBOX_CONFIG_TEST
help
The minix shell (adds just 30k) is quite complete and handles things
like for/do/done, case/esac and all the things you expect a Bourne
help
Remove the busybox introduction when starting a shell.
-config BUSYBOX_CONFIG_FEATURE_SH_STANDALONE_SHELL
+config BUSYBOX_CONFIG_FEATURE_SH_STANDALONE
bool "Standalone shell"
default n
- depends on BUSYBOX_CONFIG_MSH || BUSYBOX_CONFIG_LASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_ASH
+ depends on (BUSYBOX_CONFIG_MSH || BUSYBOX_CONFIG_LASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_ASH) && BUSYBOX_CONFIG_FEATURE_PREFER_APPLETS
help
- This option causes the selected busybox shell to use busybox applets
+ This option causes busybox shells to use busybox applets
in preference to executables in the PATH whenever possible. For
example, entering the command 'ifconfig' into the shell would cause
busybox to use the ifconfig busybox applet. Specifying the fully
is generally used when creating a statically linked version of busybox
for use as a rescue shell, in the event that you screw up your system.
- Note that this will *also* cause applets to take precedence
- over shell builtins of the same name. So turning this on will
- eliminate any performance gained by turning on the builtin "echo"
- and "test" commands in ash.
-
- Note that when using this option, the shell will attempt to directly
- run '/bin/busybox'. If you do not have the busybox binary sitting in
- that exact location with that exact name, this option will not work at
- all.
-
-config BUSYBOX_CONFIG_FEATURE_COMMAND_EDITING
- bool "Command line editing"
- default y
- depends on BUSYBOX_CONFIG_MSH || BUSYBOX_CONFIG_LASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_ASH
- help
- Enable command editing in shell.
-
-config BUSYBOX_CONFIG_FEATURE_COMMAND_EDITING_VI
- bool "vi-style line editing commands"
+ This is implemented by re-execing /proc/self/exe (typically)
+ with right parameters. Some selected applets ("NOFORK" applets)
+ can even be executed without creating new process.
+ Instead, busybox will call <applet>_main() internally.
+
+ However, this causes problems in chroot jails without mounted /proc
+ and with ps/top (command name can be shown as 'exe' for applets
+ started this way).
+# untrue?
+# Note that this will *also* cause applets to take precedence
+# over shell builtins of the same name. So turning this on will
+# eliminate any performance gained by turning on the builtin "echo"
+# and "test" commands in ash.
+# untrue?
+# Note that when using this option, the shell will attempt to directly
+# run '/bin/busybox'. If you do not have the busybox binary sitting in
+# that exact location with that exact name, this option will not work at
+# all.
+
+config BUSYBOX_CONFIG_FEATURE_SH_NOFORK
+ bool "Run 'nofork' applets directly"
default n
- depends on BUSYBOX_CONFIG_FEATURE_COMMAND_EDITING
+ depends on (BUSYBOX_CONFIG_MSH || BUSYBOX_CONFIG_LASH || BUSYBOX_CONFIG_HUSH || BUSYBOX_CONFIG_ASH) && BUSYBOX_CONFIG_FEATURE_PREFER_APPLETS
help
- Enable vi-style line editing in the shell. This mode can be
- turned on and off with "set -o vi" and "set +o vi".
+ This option causes busybox shells [currently only ash]
+ to not execute typical fork/exec/wait sequence, but call <applet>_main
+ directly, if possible. (Sometimes it is not possible: for example,
+ this is not possible in pipes).
-config BUSYBOX_CONFIG_FEATURE_COMMAND_HISTORY
- int "History size"
- default 15
- depends on BUSYBOX_CONFIG_FEATURE_COMMAND_EDITING
- help
- Specify command history size in shell.
+ This will be done only for some applets (those which are marked
+ NOFORK in include/applets.h).
-config BUSYBOX_CONFIG_FEATURE_COMMAND_SAVEHISTORY
- bool "History saving"
- default n
- depends on BUSYBOX_CONFIG_ASH && BUSYBOX_CONFIG_FEATURE_COMMAND_EDITING
- help
- Enable history saving in ash shell.
+ This may significantly speed up some shell scripts.
-config BUSYBOX_CONFIG_FEATURE_COMMAND_TAB_COMPLETION
- bool "Tab completion"
- default y
- depends on BUSYBOX_CONFIG_FEATURE_COMMAND_EDITING
- help
- Enable tab completion in shell.
+ This feature is relatively new. Use with care.
-config BUSYBOX_CONFIG_FEATURE_COMMAND_USERNAME_COMPLETION
- bool "Username completion"
+config BUSYBOX_CONFIG_CTTYHACK
+ bool "cttyhack"
default n
- depends on BUSYBOX_CONFIG_FEATURE_COMMAND_TAB_COMPLETION
help
- Enable username completion in shell.
+ One common problem reported on the mailing list is "can't access tty;
+ job control turned off" error message which typically appears when
+ one tries to use shell with stdin/stdout opened to /dev/console.
+ This device is special - it cannot be a controlling tty.
-config BUSYBOX_CONFIG_FEATURE_SH_FANCY_PROMPT
- bool "Fancy shell prompts"
- default y
- depends on BUSYBOX_CONFIG_FEATURE_COMMAND_EDITING
- help
- Setting this option allows for prompts to use things like \w and
- \$ and also using escape codes.
+ Proper solution is to use correct device instead of /dev/console.
+
+ cttyhack provides "quick and dirty" solution to this problem.
+ It analyzes stdin with various ioctls, trying to determine whether
+ it is a /dev/ttyN or /dev/ttySN (virtual terminal or serial line).
+ If it detects one, it closes stdin/out/err and reopens that device.
+ Then it executes given program. Usage example for /etc/inittab
+ (for busybox init):
+
+ ::respawn:/bin/cttyhack /bin/sh
endmenu
projects / openwrt-10.03 / .git / blobdiff