/* * Compex WP543 board support * * Copyright (C) 2008 Gabor Juhos * Copyright (C) 2008 Imre Kaloz * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published * by the Free Software Foundation. */ #include #include #include #include #include #include #include #include #include #include #define WP543_GPIO_SW6 2 #define WP543_GPIO_LED_1 3 #define WP543_GPIO_LED_2 4 #define WP543_GPIO_LED_WLAN 5 #define WP543_GPIO_LED_CONN 6 #define WP543_GPIO_LED_DIAG 7 #define WP543_GPIO_SW4 8 #define WP543_BUTTONS_POLL_INTERVAL 20 static struct spi_board_info wp543_spi_info[] = { { .bus_num = 0, .chip_select = 0, .max_speed_hz = 25000000, .modalias = "m25p80", } }; static struct ar71xx_pci_irq wp543_pci_irqs[] __initdata = { { .slot = 1, .pin = 1, .irq = AR71XX_PCI_IRQ_DEV0, }, { .slot = 1, .pin = 2, .irq = AR71XX_PCI_IRQ_DEV1, } }; static struct gpio_led wp543_leds_gpio[] __initdata = { { .name = "wp543:green:led1", .gpio = WP543_GPIO_LED_1, .active_low = 1, }, { .name = "wp543:green:led2", .gpio = WP543_GPIO_LED_2, .active_low = 1, }, { .name = "wp543:green:wlan", .gpio = WP543_GPIO_LED_WLAN, .active_low = 1, }, { .name = "wp543:green:conn", .gpio = WP543_GPIO_LED_CONN, .active_low = 1, }, { .name = "wp543:green:diag", .gpio = WP543_GPIO_LED_DIAG, .active_low = 1, } }; static struct gpio_button wp543_gpio_buttons[] __initdata = { { .desc = "sw6", .type = EV_KEY, .code = BTN_0, .threshold = 5, .gpio = WP543_GPIO_SW6, }, { .desc = "sw4", .type = EV_KEY, .code = BTN_1, .threshold = 5, .gpio = WP543_GPIO_SW4, } }; static void __init wp543_setup(void) { ar71xx_add_device_spi(NULL, wp543_spi_info, ARRAY_SIZE(wp543_spi_info)); ar71xx_add_device_mdio(0xfffffff7); ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; ar71xx_eth0_data.phy_mask = 0x00000008; ar71xx_add_device_eth(0); ar71xx_add_device_usb(); ar71xx_pci_init(ARRAY_SIZE(wp543_pci_irqs), wp543_pci_irqs); ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wp543_leds_gpio), wp543_leds_gpio); ar71xx_add_device_gpio_buttons(-1, WP543_BUTTONS_POLL_INTERVAL, ARRAY_SIZE(wp543_gpio_buttons), wp543_gpio_buttons); } MIPS_MACHINE(MACH_AR71XX_WP543, "Compex WP543", wp543_setup);