/* * AzureWave AW-NR580 board support * * Copyright (C) 2008-2009 Gabor Juhos * Copyright (C) 2008 Imre Kaloz * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published * by the Free Software Foundation. */ #include #include #include #include #include #include #include #include "devices.h" #include "dev-m25p80.h" #define AW_NR580_GPIO_LED_READY_RED 0 #define AW_NR580_GPIO_LED_WLAN 1 #define AW_NR580_GPIO_LED_READY_GREEN 2 #define AW_NR580_GPIO_LED_WPS_GREEN 4 #define AW_NR580_GPIO_LED_WPS_AMBER 5 #define AW_NR580_GPIO_BTN_WPS 3 #define AW_NR580_GPIO_BTN_RESET 11 #define AW_NR580_BUTTONS_POLL_INTERVAL 20 static struct gpio_led aw_nr580_leds_gpio[] __initdata = { { .name = "aw-nr580:red:ready", .gpio = AW_NR580_GPIO_LED_READY_RED, .active_low = 0, }, { .name = "aw-nr580:green:ready", .gpio = AW_NR580_GPIO_LED_READY_GREEN, .active_low = 0, }, { .name = "aw-nr580:green:wps", .gpio = AW_NR580_GPIO_LED_WPS_GREEN, .active_low = 0, }, { .name = "aw-nr580:amber:wps", .gpio = AW_NR580_GPIO_LED_WPS_AMBER, .active_low = 0, }, { .name = "aw-nr580:green:wlan", .gpio = AW_NR580_GPIO_LED_WLAN, .active_low = 0, } }; static struct gpio_button aw_nr580_gpio_buttons[] __initdata = { { .desc = "reset", .type = EV_KEY, .code = BTN_0, .threshold = 5, .gpio = AW_NR580_GPIO_BTN_RESET, .active_low = 1, }, { .desc = "wps", .type = EV_KEY, .code = BTN_1, .threshold = 5, .gpio = AW_NR580_GPIO_BTN_WPS, .active_low = 1, } }; static struct ar71xx_pci_irq aw_nr580_pci_irqs[] __initdata = { { .slot = 1, .pin = 1, .irq = AR71XX_PCI_IRQ_DEV1, } }; static void __init aw_nr580_setup(void) { ar71xx_add_device_mdio(0x0); ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; ar71xx_eth0_data.phy_mask = 0xf; ar71xx_eth0_data.speed = SPEED_100; ar71xx_eth0_data.duplex = DUPLEX_FULL; ar71xx_add_device_eth(0); ar71xx_pci_init(ARRAY_SIZE(aw_nr580_pci_irqs), aw_nr580_pci_irqs); ar71xx_add_device_m25p80(NULL); ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(aw_nr580_leds_gpio), aw_nr580_leds_gpio); ar71xx_add_device_gpio_buttons(-1, AW_NR580_BUTTONS_POLL_INTERVAL, ARRAY_SIZE(aw_nr580_gpio_buttons), aw_nr580_gpio_buttons); } MIPS_MACHINE(AR71XX_MACH_AW_NR580, "AzureWave AW-NR580", aw_nr580_setup);