/* * (C) Copyright 2003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ /* * This file contains the configuration parameters for the danube board. */ #ifndef __CONFIG_H #define __CONFIG_H #define USE_REFERENCE_BOARD //#define USE_EVALUATION_BOARD //#define DANUBE_BOOT_FROM_EBU #define DANUBE_USE_DDR_RAM #ifdef DANUBE_USE_DDR_RAM //#define DANUBE_DDR_RAM_111M #define DANUBE_DDR_RAM_166M //#define PROMOSDDR400 //#define DDR_SAMSUNG_166M //#define DDR_PSC_166M //#define DANUBE_DDR_RAM_133M #define DANUBE_DDR_RAM_SIZE 32 /* 32M DDR-DRAM for reference board */ #endif #define CONFIG_LZMA 1 /* use LZMA for compression */ #define CLK_OUT2_25MHZ #define CONFIG_MIPS32 1 /* MIPS 4Kc CPU core */ #define CONFIG_IFX_MIPS 1 /* in an Infineon chip */ #define CONFIG_DANUBE 1 /* on a danube Board */ #define RAM_SIZE 0x2000000 /*32M ram*/ #define CPU_CLOCK_RATE 235000000 /* 235 MHz clock for the MIPS core */ #define INFINEON_EBU_BOOTCFG 0x688C688C /* CMULT = 8 for 150 MHz */ #define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ #define CONFIG_BAUDRATE 115200 #define DEBUG_PARSER 2 /* valid baudrates */ #define CFG_BAUDRATE_TABLE { 300, 9600, 19200, 38400, 57600, 115200 } #ifndef CFG_BOOTSTRAP_CODE #define CONFIG_TIMESTAMP /* Print image info with timestamp */ #endif #define CONFIG_PREBOOT "echo;" \ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ "echo" #undef CONFIG_BOOTARGS /* by MarsLin 2005/05/10, to support different hardware configuations */ //#define CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ "ethaddr=11:22:33:44:55:66\0" \ "serverip=192.168.45.100\0" \ "ipaddr=192.168.45.108\0" \ "ram_addr=0x80500000\0" \ "kernel_addr=0xb0030000\0" \ "flashargs=setenv bootargs rootfstype=squashfs,jffs2 init=/etc/preinit\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} init=/etc/preinit\0" \ "addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off\0" \ "addmisc=setenv bootargs ${bootargs} console=ttyS1,115200 ethaddr=${ethaddr} ${mtdparts}\0" \ "flash_flash=run flashargs addip addmisc;bootm ${kernel_addr}\0" \ "flash_nfs=run nfsargs addip addmisc;bootm ${kernel_addr}\0" \ "net_flash=run load_kernel flashargs addip addmisc;bootm ${ram_addr}\0" \ "net_nfs=run load_kernel nfsargs addip addmisc;bootm ${ram_addr}\0" \ "load_kernel=tftp ${ram_addr} ${tftppath}openwrt-ifxmips-uImage\0" \ "update_uboot=tftp 0x80500000 u-boot.ifx;era 1:0-10; cp.b 0x80500000 0xb0000000 0x10000\0" \ "update_openwrt=tftp ${ram_addr} ${tftppath}openwrt-ifxmips-squashfs.image; era ${kernel_addr} +${filesize} 0; cp.b ${ram_addr} ${kernel_addr} ${filesize}\0" #define CONFIG_BOOTCOMMAND "run flash_flash" #define CONFIG_COMMANDS_YES (CONFIG_CMD_DFL | \ CFG_CMD_ASKENV | \ CFG_CMD_NET ) #define CONFIG_COMMANDS_NO (CFG_CMD_NFS | \ CFG_CMD_FPGA | \ CFG_CMD_IMLS | \ CFG_CMD_ITEST | \ CFG_CMD_XING | \ CFG_CMD_IMI | \ CFG_CMD_BMP | \ CFG_CMD_BOOTD | \ CFG_CMD_CONSOLE | \ CFG_CMD_LOADS | \ CFG_CMD_LOADB ) #define CONFIG_COMMANDS (CONFIG_COMMANDS_YES & ~CONFIG_COMMANDS_NO) #if 0 CFG_CMD_DHCP CFG_CMD_ELF CFG_CMD_NAND #endif #include /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "DANUBE # " /* Monitor Command Prompt */ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ #define CFG_MAXARGS 16 /* max number of command args*/ #define CFG_MALLOC_LEN 128*1024 #define CFG_BOOTPARAMS_LEN 128*1024 #define CFG_HZ (CPU_CLOCK_RATE / 2) #define CFG_LOAD_ADDR 0x80100000 /* default load address */ #define CFG_MEMTEST_START 0x80100000 #define CFG_MEMTEST_END 0x80400000 /*----------------------------------------------------------------------- * FLASH and environment organization */ #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ #define CFG_MAX_FLASH_SECT (135) /* max number of sectors on one chip */ #define PHYS_FLASH_1 0xB0000000 /* Flash Bank #1 */ #define PHYS_FLASH_2 0xB4000000 /* Flash Bank #2 */ #define BOOTSTRAP_TEXT_BASE 0xb0000000 /* The following #defines are needed to get flash environment right */ #define CFG_MONITOR_BASE UBOOT_RAM_TEXT_BASE /* board/danube/config.mk. = 0xA0800000 */ #define BOOTSTRAP_CFG_MONITOR_BASE BOOTSTRAP_TEXT_BASE /* board/danube/config.mk. = 0xA0800000 */ #define CFG_MONITOR_LEN (256 << 10) #define CFG_INIT_SP_OFFSET 0x400000 #define CFG_FLASH_BASE PHYS_FLASH_1 /* timeout values are in ticks */ #define CFG_FLASH_ERASE_TOUT (20 * CFG_HZ) /* Timeout for Flash Erase */ #define CFG_FLASH_WRITE_TOUT (20 * CFG_HZ) /* Timeout for Flash Write */ #define CFG_ENV_IS_IN_FLASH 1 //#define CFG_ENV_IS_NOWHERE 1 //#define CFG_ENV_IS_IN_NVRAM 1 /* Address and size of Primary Environment Sector */ #define CFG_ENV_ADDR 0xB0020000 #define CFG_ENV_SIZE 0x10000 #define CONFIG_FLASH_16BIT #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_DANUBE_SWITCH #define CONFIG_NET_MULTI #define CONFIG_ENV_OVERWRITE #define EXCEPTION_BASE 0x200 /** *\brief definition for nand * */ #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define NAND_ChipID_UNKNOWN 0x00 #define SECTORSIZE 512 #define NAND_MAX_FLOORS 1 #define NAND_MAX_CHIPS 1 #define ADDR_COLUMN 1 #define ADDR_PAGE 2 #define ADDR_COLUMN_PAGE 3 #define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */ #define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */ #define NAND_DISABLE_CE(nand) #define NAND_ENABLE_CE(nand) #define NAND_WAIT_READY(nand) #define WRITE_NAND_COMMAND(d, adr) #define WRITE_NAND_ADDRESS(d, adr) #define WRITE_NAND(d, adr) #define READ_NAND(adr) /* the following are NOP's in our implementation */ #define NAND_CTL_CLRALE(nandptr) #define NAND_CTL_SETALE(nandptr) #define NAND_CTL_CLRCLE(nandptr) #define NAND_CTL_SETCLE(nandptr) #define NAND_BASE_ADDRESS 0xB4000000 #define NAND_WRITE(addr, val) *((u8*)(NAND_BASE_ADDRESS | (addr))) = val;while((*EBU_NAND_WAIT & 0x08) == 0); #define NAND_READ(addr, val) val = *((u8*)(NAND_BASE_ADDRESS | (addr))) #define NAND_CE_SET #define NAND_CE_CLEAR #define NAND_READY ( ((*EBU_NAND_WAIT)&0x07) == 7) #define NAND_READY_CLEAR *EBU_NAND_WAIT = 0; #define WRITE_CMD 0x18 #define WRITE_ADDR 0x14 #define WRITE_LADDR 0x10 #define WRITE_DATA 0x10 #define READ_DATA 0x10 #define READ_LDATA 0x00 #define ACCESS_WAIT #define IFX_ATC_NAND 0xc176 #define IFX_BTC_NAND 0xc166 #define ST_512WB2_NAND 0x2076 #define NAND_OK 0x00000000 /* Bootstrap succesful, start address in BOOT_RVEC */ #define NAND_ERR 0x80000000 #define NAND_ACC_TIMEOUT (NAND_ERR | 0x00000001) #define NAND_ACC_ERR (NAND_ERR | 0x00000002) /***************************************************************************** * DANUBE *****************************************************************************/ /* lock cache for C program stack */ /* points to ROM */ /* stack size is 16K */ #define LOCK_DCACHE_ADDR 0x9FC00000 #define LOCK_DCACHE_SIZE 0x1000 /* * Memory layout */ #define CFG_SDRAM_BASE 0x80000000 #define CFG_SDRAM_BASE_UNCACHE 0xA0000000 #define CFG_CACHE_LOCK_SIZE LOCK_DCACHE_SIZE /* * Cache settings */ #define CFG_CACHE_SIZE 16384 #define CFG_CACHE_LINES 32 #define CFG_CACHE_WAYS 4 #define CFG_CACHE_SETS 128 #define CFG_ICACHE_SIZE CFG_CACHE_SIZE #define CFG_DCACHE_SIZE CFG_CACHE_SIZE #define CFG_CACHELINE_SIZE CFG_CACHE_LINES #endif /* __CONFIG_H */