From 716174d8150eb57790ed9e9d7260f3cdefe3239c Mon Sep 17 00:00:00 2001 From: blogic Date: Wed, 23 Dec 2015 18:24:56 +0000 Subject: [PATCH] lantiq: TDW89x0 - increase spi frequency Use the same max spi frequency as set in u-boot. According to the datasheets, the Q64-104HIP as well as the Winbond 25Q64FVSIG support spi frequencies up to 50 MHz. During my tests, the Q64-104HIP couldn't be recognized/initialized if the frequency was > 40MHz. Both chips do support fast read as well. While touching the dts file, I fixed the dtc compiler warnings. Signed-off-by: Mathias Kresin git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47994 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- target/linux/lantiq/dts/TDW89X0.dtsi | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/target/linux/lantiq/dts/TDW89X0.dtsi b/target/linux/lantiq/dts/TDW89X0.dtsi index cd3d6bdbbd..46ff11f547 100644 --- a/target/linux/lantiq/dts/TDW89X0.dtsi +++ b/target/linux/lantiq/dts/TDW89X0.dtsi @@ -16,12 +16,14 @@ interrupt-parent = <&icu0>; interrupts = <22 23 24>; #address-cells = <1>; + #size-cells = <1>; m25p80@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; - reg = <3>; - spi-max-frequency = <20000000>; + reg = <3 0>; + spi-max-frequency = <33250000>; + m25p,fast-read; partition@0 { reg = <0x0 0x20000>; -- 2.35.1