From 09b5c94c9ee54821da6c71b582ae340f0a0f7c44 Mon Sep 17 00:00:00 2001 From: nbd Date: Wed, 25 Mar 2009 01:26:36 +0000 Subject: [PATCH] madwifi: treat rxorn like rx, reset after rxorn seems to do more harm than good git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15030 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- package/madwifi/patches/413-rxorn.patch | 31 +++++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 package/madwifi/patches/413-rxorn.patch diff --git a/package/madwifi/patches/413-rxorn.patch b/package/madwifi/patches/413-rxorn.patch new file mode 100644 index 000000000..b4174716d --- /dev/null +++ b/package/madwifi/patches/413-rxorn.patch @@ -0,0 +1,31 @@ +--- a/ath/if_ath.c ++++ b/ath/if_ath.c +@@ -2307,6 +2307,17 @@ ath_intr(int irq, void *dev_id, struct p + + sc->sc_isr = status; + status &= sc->sc_imask; /* discard unasked for bits */ ++ ++ /* Treat RXORN as non-fatal. Either the bus is busy or the CPU ++ * is not fast enough to process all frames. Treat it like ++ * an Rx interrupt ++ */ ++ if (status & HAL_INT_RXORN) { ++ sc->sc_stats.ast_rxorn++; ++ status &= ~HAL_INT_RXORN; ++ status |= HAL_INT_RX; ++ } ++ + /* As soon as we know we have a real interrupt we intend to service, + * we will check to see if we need an initial hardware TSF reading. + * Normally we would just populate this all the time to keep things +@@ -2319,10 +2330,6 @@ ath_intr(int irq, void *dev_id, struct p + sc->sc_stats.ast_hardware++; + ath_hal_intrset(ah, 0); /* disable intr's until reset */ + ATH_SCHEDULE_TQUEUE(&sc->sc_fataltq, &needmark); +- } else if (status & HAL_INT_RXORN) { +- sc->sc_stats.ast_rxorn++; +- ath_hal_intrset(ah, 0); /* disable intr's until reset */ +- ATH_SCHEDULE_TQUEUE(&sc->sc_rxorntq, &needmark); + } else { + if (status & HAL_INT_SWBA) { + struct ieee80211vap * vap; -- 2.35.1