function p(cfgname, name) {
if (c[name] != "") print " option " cfgname " \"" c[name] "\""
}
function p(cfgname, name) {
if (c[name] != "") print " option " cfgname " \"" c[name] "\""
}
+
+ function macinc(mac, maca, i, result) {
+ split(mac, maca, ":")
+ for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i]
+ if (++maca[6] > 0xff) {
+ maca[5]++
+ maca[6] = 0
+ }
+ for (i = 1; i <= 6; i++) {
+ if (i != 1) result = result ":"
+ result = result sprintf("%02x", maca[i])
+ }
+ return result
+ }
+
BEGIN {
FS="="
c["lan_ifname"]="eth0.0"
c["wan_ifname"]="eth0.1"
c["vlan0ports"]="1 2 3 4 5*"
c["vlan1ports"]="0 5"
BEGIN {
FS="="
c["lan_ifname"]="eth0.0"
c["wan_ifname"]="eth0.1"
c["vlan0ports"]="1 2 3 4 5*"
c["vlan1ports"]="0 5"
+ getline < "/proc/diag/model"
+ model=$0
+ for (i = 0; i < 6; i++) {
+ if (mac_check != "") mac_check = mac_check ":"
+ mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
+ }
- ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") {
+ ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) {
- # v1 hardware
- if (nvram["boardtype"] == "bcm94710dev") {
- # Asus WL-500g
- if (nvram["boardnum"] == "asusX") {
- c["lan_ifname"]="eth0 eth1" # FIXME
- c["wan_ifname"]=""
- }
+ if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
+ c["wan_ifname"] = ""
+ c["lan_ifname"] = "eth1"
}
if (nvram["boardtype"] == "bcm94710r4") {
# Toshiba WRC-1000
}
if (nvram["boardtype"] == "bcm94710r4") {
# Toshiba WRC-1000
c["vlan0ports"] = "0 1 2 3 5*"
c["vlan1ports"] = "4 5"
}
c["vlan0ports"] = "0 1 2 3 5*"
c["vlan1ports"] = "4 5"
}
- if ((nvram["boardtype"] == "0x0467") || (nvram["boardtype"] == "0x042f")) {
+ if (nvram["boardtype"] == "0x0467") {
+ c["vlan0ports"] = "0 1 2 3 5*"
+ c["vlan1ports"] = "4 5"
+ }
+ if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) {
if (nvram["boardnum"] == "45") {
if (nvram["boardnum"] == "45") {
c["vlan0ports"] = "1 2 3 4 5*"
c["vlan1ports"] = "0 5"
} else {
c["vlan0ports"] = "1 2 3 4 5*"
c["vlan1ports"] = "0 5"
} else {
- c["vlan0ports"] = "0 1 2 3 5*"
- c["vlan1ports"] = "4 5"
+ # Generic BCM94704
+ c["vlan0ports"] = "0 1 2 3 4 5u"
+ c["vlan1ports"] = ""
+ c["lan_ifname"] = "eth0"
+ c["wan_ifname"] = "eth1"
+
+ # MAC addresses on 4704 tend to be screwed up. Add a workaround here
+ if (nvram["et0macaddr"] ~ mac_check) {
+ c["lan_macaddr"] = nvram["et0macaddr"]
+ c["wan_macaddr"] = macinc(c["lan_macaddr"])
+ }
# WAP54G
if ((nvram["boardnum"] == "2") || \
(nvram["boardnum"] == "1024")) {
# WAP54G
if ((nvram["boardnum"] == "2") || \
(nvram["boardnum"] == "1024")) {
print "config interface lan"
print " option type bridge"
p("ifname", "lan_ifname")
print "config interface lan"
print " option type bridge"
p("ifname", "lan_ifname")
+ p("macaddr", "lan_macaddr")
print " option proto static"
print " option ipaddr 192.168.1.1"
print " option netmask 255.255.255.0"
print " option proto static"
print " option ipaddr 192.168.1.1"
print " option netmask 255.255.255.0"
print "#### WAN configuration"
print "config interface wan"
p("ifname", "wan_ifname")
print "#### WAN configuration"
print "config interface wan"
p("ifname", "wan_ifname")
+ p("macaddr", "wan_macaddr")
print " option proto dhcp"
}' > /etc/config/network
}
print " option proto dhcp"
}' > /etc/config/network
}