X-Git-Url: http://git.ozo.com/?a=blobdiff_plain;f=target%2Flinux%2Frb532%2Fpatches-2.6.30%2F002-rb532_nand_fixup.patch;fp=target%2Flinux%2Frb532%2Fpatches-2.6.30%2F002-rb532_nand_fixup.patch;h=0000000000000000000000000000000000000000;hb=2d20db22f18b08daf1984eff882c1d23f3285bf0;hp=82c191295f2a70b4c67272a6649966453474260d;hpb=3e9fcfad69e5dde22357a178db05b6af84d6aaa4;p=openwrt-10.03%2F.git diff --git a/target/linux/rb532/patches-2.6.30/002-rb532_nand_fixup.patch b/target/linux/rb532/patches-2.6.30/002-rb532_nand_fixup.patch deleted file mode 100644 index 82c191295..000000000 --- a/target/linux/rb532/patches-2.6.30/002-rb532_nand_fixup.patch +++ /dev/null @@ -1,48 +0,0 @@ ---- a/arch/mips/rb532/devices.c -+++ b/arch/mips/rb532/devices.c -@@ -140,6 +140,19 @@ static struct platform_device cf_slot0 = - }; - - /* Resources and device for NAND */ -+ -+/* -+ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader -+ * will not be able to find the kernel that we load. So set the oobinfo -+ * when creating the partitions -+ */ -+static struct nand_ecclayout rb532_nand_ecclayout = { -+ .eccbytes = 6, -+ .eccpos = { 8, 9, 10, 13, 14, 15 }, -+ .oobavail = 9, -+ .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } } -+}; -+ - static int rb532_dev_ready(struct mtd_info *mtd) - { - return gpio_get_value(GPIO_RDY); -@@ -281,6 +294,16 @@ static void __init parse_mac_addr(char * - /* NAND definitions */ - #define NAND_CHIP_DELAY 25 - -+static int rb532_nand_fixup(struct mtd_info *mtd) -+{ -+ struct nand_chip *chip = mtd->priv; -+ -+ if (mtd->writesize == 512) -+ chip->ecc.layout = &rb532_nand_ecclayout; -+ -+ return 0; -+} -+ - static void __init rb532_nand_setup(void) - { - switch (mips_machtype) { -@@ -300,6 +323,8 @@ static void __init rb532_nand_setup(void - rb532_nand_data.chip.partitions = rb532_partition_info; - rb532_nand_data.chip.chip_delay = NAND_CHIP_DELAY; - rb532_nand_data.chip.options = NAND_NO_AUTOINCR; -+ -+ rb532_nand_data.chip.chip_fixup = &rb532_nand_fixup; - } - -