X-Git-Url: http://git.ozo.com/?a=blobdiff_plain;f=target%2Flinux%2Fgeneric-2.6%2Fpatches-2.6.31%2F691-phy_rtl8366.patch;h=4ce0520b11a8f6bfcca9a0c820b7a43b9d8a1e96;hb=a5af4ae7d58b09c2360e426a1825f4c2666469e2;hp=6223f00fe7355c3545adacf3488d641058b1323f;hpb=89d9fb80f64d2521e344ff8dc2556c88a0e03809;p=openwrt-10.03%2F.git

diff --git a/target/linux/generic-2.6/patches-2.6.31/691-phy_rtl8366.patch b/target/linux/generic-2.6/patches-2.6.31/691-phy_rtl8366.patch
index 6223f00fe..4ce0520b1 100644
--- a/target/linux/generic-2.6/patches-2.6.31/691-phy_rtl8366.patch
+++ b/target/linux/generic-2.6/patches-2.6.31/691-phy_rtl8366.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -135,4 +135,25 @@ config MDIO_GPIO
+@@ -135,4 +135,29 @@ config MDIO_GPIO
  	  To compile this driver as a module, choose M here: the module
  	  will be called mdio-gpio.
  
@@ -17,9 +17,13 @@
 +	tristate "Driver for the Realtek RTL8366S switch"
 +	select SWCONFIG
 +
++config RTL8366RB_PHY
++	tristate "Driver for the Realtek RTL8366RB switch"
++	select SWCONFIG
++
 +config RTL8366S_PHY_DEBUG_FS
-+	bool "RTL8366S switch driver DEBUG_FS support"
-+	depends on RTL8366S_PHY
++	bool "RTL8366 switch driver DEBUG_FS support"
++	depends on RTL8366S_PHY || RTL8366RB_PHY
 +	depends on DEBUG_FS
 +	default n
 +
@@ -28,12 +32,13 @@
  endif # PHYLIB
 --- a/drivers/net/phy/Makefile
 +++ b/drivers/net/phy/Makefile
-@@ -19,6 +19,8 @@ obj-$(CONFIG_IP175C_PHY)	+= ip175c.o
+@@ -19,6 +19,9 @@ obj-$(CONFIG_IP175C_PHY)	+= ip175c.o
  obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
  obj-$(CONFIG_AR8216_PHY)	+= ar8216.o
  obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
 +obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi.o
 +obj-$(CONFIG_RTL8366S_PHY)	+= rtl8366s.o
++obj-$(CONFIG_RTL8366RB_PHY)	+= rtl8366rb.o
  obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
  obj-$(CONFIG_FIXED_PHY)		+= fixed.o
  obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o