X-Git-Url: http://git.ozo.com/?a=blobdiff_plain;f=target%2Flinux%2Fau1000%2Fpatches-2.6.32%2F004-state_led_phy_fix.patch;fp=target%2Flinux%2Fau1000%2Fpatches-2.6.32%2F004-state_led_phy_fix.patch;h=cfaea00e2802910041bde2e93a5cf41d979d1661;hb=eb175bb4f21e84f7ca73ba470150793ce1f3ac64;hp=0000000000000000000000000000000000000000;hpb=78b9379b8f9358dfb4f75f4e0ee1a5cd97ecb825;p=openwrt-10.03%2F.git

diff --git a/target/linux/au1000/patches-2.6.32/004-state_led_phy_fix.patch b/target/linux/au1000/patches-2.6.32/004-state_led_phy_fix.patch
new file mode 100644
index 000000000..cfaea00e2
--- /dev/null
+++ b/target/linux/au1000/patches-2.6.32/004-state_led_phy_fix.patch
@@ -0,0 +1,31 @@
+--- a/drivers/net/au1000_eth.c
++++ b/drivers/net/au1000_eth.c
+@@ -166,6 +166,15 @@ struct au1000_private *au_macs[NUM_ETH_I
+ #  undef AU1XXX_PHY1_IRQ
+ #endif
+ 
++#if defined(CONFIG_MIPS_MTX1)
++/*
++ * 4G MeshCube (MTX-1) board
++ * PHY is at address 31 on MAC0
++ * autodetect fails if not searched for highest address !
++ */
++# define AU1XXX_PHY_SEARCH_HIGHEST_ADDR
++#endif
++
+ #if defined(AU1XXX_PHY0_BUSID) && (AU1XXX_PHY0_BUSID > 0)
+ # error MAC0-associated PHY attached 2nd MACs MII bus not supported yet
+ #endif
+@@ -483,6 +492,12 @@ static int mii_probe (struct net_device 
+ 	aup->old_duplex = -1;
+ 	aup->phy_dev = phydev;
+ 
++#ifdef CONFIG_MIPS_MTX1
++	/* set up ethernet jack LEDs on the 4G MeshCube (MTX-1 board) */
++	printk(KERN_INFO "MTX-1 PHY: updating LED settings\n");
++	phy_write(phydev, 0x11, 0xff80);
++#endif
++
+ 	printk(KERN_INFO "%s: attached PHY driver [%s] "
+ 	       "(mii_bus:phy_addr=%s, irq=%d)\n", dev->name,
+ 	       phydev->drv->name, dev_name(&phydev->dev), phydev->irq);