X-Git-Url: http://git.ozo.com/?a=blobdiff_plain;f=target%2Flinux%2Far71xx%2Fpatches-2.6.30%2F202-spi_vsc7385_driver.patch;fp=target%2Flinux%2Far71xx%2Fpatches-2.6.30%2F202-spi_vsc7385_driver.patch;h=0000000000000000000000000000000000000000;hb=e79a74f292b5ec764382c3cda43581b4ad774f09;hp=b071d5d21cc28e9fa53ec769bc4a5dadd09233c2;hpb=052aabe37a34967fc0d8d0ad459ff22f9facb9da;p=openwrt-10.03%2F.git

diff --git a/target/linux/ar71xx/patches-2.6.30/202-spi_vsc7385_driver.patch b/target/linux/ar71xx/patches-2.6.30/202-spi_vsc7385_driver.patch
deleted file mode 100644
index b071d5d21..000000000
--- a/target/linux/ar71xx/patches-2.6.30/202-spi_vsc7385_driver.patch
+++ /dev/null
@@ -1,24 +0,0 @@
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -272,6 +272,11 @@ config SPI_TLE62X0
- 	  sysfs interface, with each line presented as a kind of GPIO
- 	  exposing both switch control and diagnostic feedback.
- 
-+config SPI_VSC7385
-+	tristate "Vitesse VSC7385 ethernet switch driver"
-+	help
-+	  SPI driver for the Vitesse VSC7385 ethernet switch.
-+
- #
- # Add new SPI protocol masters in alphabetical order above this line
- #
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -37,6 +37,7 @@ obj-$(CONFIG_SPI_SH_SCI)		+= spi_sh_sci.
- 
- # SPI protocol drivers (device/link on bus)
- obj-$(CONFIG_SPI_SPIDEV)	+= spidev.o
-+obj-$(CONFIG_SPI_VSC7385)	+= spi_vsc7385.o
- obj-$(CONFIG_SPI_TLE62X0)	+= tle62x0.o
- # 	... add above this line ...
-