X-Git-Url: http://git.ozo.com/?a=blobdiff_plain;f=target%2Flinux%2Far71xx%2Fimage%2Flzma-loader%2Fsrc%2Fboard.c;h=2f4dd6b1f6456a9b4a1036c0fc96907dee72e0ca;hb=7750261206223f10b636fea46c9bc493a57de57c;hp=f1f97442f57535b789aecc6fbbce7411aad964d8;hpb=70b3c1262bec05f587d0ea43cbcccd487d0dc46f;p=openwrt-working-2016%2F.git

diff --git a/target/linux/ar71xx/image/lzma-loader/src/board.c b/target/linux/ar71xx/image/lzma-loader/src/board.c
index f1f97442f5..2f4dd6b1f6 100644
--- a/target/linux/ar71xx/image/lzma-loader/src/board.c
+++ b/target/linux/ar71xx/image/lzma-loader/src/board.c
@@ -10,10 +10,13 @@
 
 #include <stddef.h>
 #include "config.h"
+#include "ar71xx_regs.h"
 
 #define READREG(r)	*(volatile unsigned int *)(r)
 #define WRITEREG(r,v)	*(volatile unsigned int *)(r) = v
 
+#define KSEG1ADDR(_x)	(((_x) & 0x1fffffff) | 0xa0000000)
+
 #define UART_BASE	0xb8020000
 
 #define UART_TX		0
@@ -31,6 +34,23 @@ void board_putc(int ch)
 	while (((UART_READ(UART_LSR)) & UART_LSR_THRE) == 0);
 }
 
+#ifdef CONFIG_BOARD_TL_WR1043ND_V1
+static void tlwr1043nd_init(void)
+{
+	unsigned int reg = KSEG1ADDR(AR71XX_RESET_BASE);
+	unsigned int t;
+
+	t = READREG(reg + AR913X_RESET_REG_RESET_MODULE);
+	t |= AR71XX_RESET_GE0_PHY;
+	WRITEREG(reg + AR913X_RESET_REG_RESET_MODULE, t);
+	/* flush write */
+	t = READREG(reg + AR913X_RESET_REG_RESET_MODULE);
+}
+#else
+static inline void tlwr1043nd_init(void) {}
+#endif
+
 void board_init(void)
 {
+	tlwr1043nd_init();
 }