X-Git-Url: http://git.ozo.com/?a=blobdiff_plain;f=scripts%2Fflashing%2Fflash.sh;h=d568ed5b22f2756652eeba15470808e03f51fbe8;hb=69f8983af4665df5c7b9f538e71f97698517b8f9;hp=3499581ef458cc6f4875a11b82f1979fb3123c69;hpb=20940138ac41e3eca54afefc34f65e40834be3ea;p=openwrt%2F.git diff --git a/scripts/flashing/flash.sh b/scripts/flashing/flash.sh index 3499581ef4..d568ed5b22 100755 --- a/scripts/flashing/flash.sh +++ b/scripts/flashing/flash.sh @@ -1,6 +1,6 @@ #!/bin/bash # -# tftp flash script for wireless routers +# tftp flash script for wireless routers # # Copyright (C) 2004 by Oleg I. Vdovikin # Copyright (C) 2005 by Waldemar Brodkorb @@ -20,14 +20,14 @@ # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # -if [ -z "$1" ] || [ ! -f $1 ] || [ -z $2 ]; then - echo Usage: $0 firmware vendor +if [ -z "$1" ] || [ ! -f "$1" ] || [ -z "$2" ]; then + echo Usage: "$0" firmware vendor cat << EOF IMPORTANT: -Notes for Linksys / Asus WL500gx router: +Notes for Linksys / Asus WL500gx router: be sure you have set boot_wait to yes. Power on your router after executing this script. - + Notes for Asus WL500g router: be sure POWER led is flashing (If this is not the case poweroff the device, push the reset button & power on @@ -52,15 +52,15 @@ fi if [ "$2" = "asus" ]; then echo Confirming IP address setting... echo -en "get ASUSSPACELINK\x01\x01\xa8\xc0 /dev/null\nquit\n" | tftp 192.168.1.1 -echo Flashing 192.168.1.1 using $1... +echo Flashing 192.168.1.1 using "$1"... echo -en "binary\nput $1 ASUSSPACELINK\nquit\n" | tftp 192.168.1.1 -echo Please wait until leds stops flashing. +echo Please wait until leds stops flashing. elif [ "$2" = "linksys" ]; then -echo Flashing 192.168.1.1 using $1... +echo Flashing 192.168.1.1 using "$1"... echo -en "rexmt 1\ntrace\nbinary\nput $1\nquit\n" | tftp 192.168.1.1 echo Please wait until power led stops flashing. Do not poweroff! Then you can login via telnet 192.168.1.1. elif [ "$2" = "toshiba" ]; then -echo Flashing 192.168.10.1 using $1... +echo Flashing 192.168.10.1 using "$1"... echo -en "rexmt 1\ntrace\nbinary\nput $1\nquit\n" | tftp 192.168.10.1 echo Unit will automatically reboot within 5 minutes. Do not power off. Then you can login via telnet 192.168.10.1. fi