X-Git-Url: http://git.ozo.com/?a=blobdiff_plain;f=scripts%2Farm-magic.sh;h=2a82a3303dc33d025df06a580f0f9a7081463bbd;hb=23660965c9671a573d958374ce1ef0b7c5b317b8;hp=3ac5e79b99b3386c5383274f8dbb80382c1eb867;hpb=0a679eefa60bbc9082da79457cb5a355efa7d88c;p=openwrt-10.03%2F.git

diff --git a/scripts/arm-magic.sh b/scripts/arm-magic.sh
index 3ac5e79b9..2a82a3303 100755
--- a/scripts/arm-magic.sh
+++ b/scripts/arm-magic.sh
@@ -22,16 +22,16 @@
 # NOTE: for now it's for only IXP4xx in big endian mode
 
 # list of supported boards, in "boardname machtypeid" format
-for board in "avila 526" "gateway7001 731" "nslu2 597" "nas100d 865"
+for board in "avila 526" "gateway7001 731" "nslu2 597" "nas100d 865" "wg302v2 890" "pronghornmetro 1040" "compex 1273" "wrt300nv2 1077" "loft 849" "dsmg600 964" "fsg3 1091"
 do
   set -- $board
+  hexid=$(printf %x\\n $2)
   if [ "$2" -lt "256" ]; then
     # we have a low machtypeid, we just need a "mov" (e3a)
-    echo -en "\xe3\xa0\x10\x$(printf %x\\n $2)" > $BIN_DIR/openwrt-$1-2.6-zImage
+    printf "\xe3\xa0\x10\x$hexid" > $BIN_DIR/openwrt-$1-2.6-zImage
   else
     # we have a high machtypeid, we need a "mov" (e3a) and an "orr" (e38)
-    hexid=$(printf %x\\n $2)
-    echo -en "\xe3\xa0\x10\x$(echo $hexid|cut -b "2 3")\xe3\x81\x1c\x$(echo $hexid|cut -b 1)" > $BIN_DIR/openwrt-$1-2.6-zImage
+    printf "\xe3\xa0\x10\x$(echo $hexid|cut -b "2 3")\xe3\x81\x1c\x$(echo $hexid|cut -b 1)" > $BIN_DIR/openwrt-$1-2.6-zImage
   fi
     # generate the image
     cat $BIN_DIR/openwrt-ixp4xx-2.6-zImage >> $BIN_DIR/openwrt-$1-2.6-zImage