ramips: export slic IRQ line in dwr-512

[lede-git/.git] / target / linux / ramips / dts / DWR-512-B.dts

diff --git a/target/linux/ramips/dts/DWR-512-B.dts b/target/linux/ramips/dts/DWR-512-B.dts
index ab3c02aeb3470d189f4d32bab4766ca9f00adbae..42be55e0cf81249edb818df6f515b7c7b63919a4 100644 (file)
--- a/target/linux/ramips/dts/DWR-512-B.dts
+++ b/target/linux/ramips/dts/DWR-512-B.dts
@@ -33,7 +33,7 @@
 
                sms {
                        label = "dwr-512-b:green:sms";
-                       gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
                };
                status {
                        label = "dwr-512-b:green:status";
@@ -61,6 +61,10 @@
                compatible = "gpio-export";
                #size-cells = <0>;
 
+               slic_int {
+                       gpio-export,name = "slic_int";
+                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+               };
                modem3g_enable {
                        gpio-export,name = "modem3g_enable";
                        gpio-export,output = <1>;
@@ -104,6 +108,19 @@
        };
 };
 
+&spi1 {
+       status = "okay";
+
+       spidev@1 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "siliconlabs,si3210";
+
+               reg = <0>;
+               spi-max-frequency = <1000000>;
+       };
+};
+
 &pinctrl {
        state_default: pinctrl0 {
                gpio {