switch ixp4xx and ubicom32 to 2.6.30, get rid of 2.6.28 files

[openwrt-10.03/.git] / target / linux / brcm47xx / patches-2.6.28 / 250-ohci-ssb-usb2.patch

diff --git a/target/linux/brcm47xx/patches-2.6.28/250-ohci-ssb-usb2.patch b/target/linux/brcm47xx/patches-2.6.28/250-ohci-ssb-usb2.patch
deleted file mode 100644 (file)
index 25b27e4..0000000
--- a/target/linux/brcm47xx/patches-2.6.28/250-ohci-ssb-usb2.patch
+++ /dev/null
@@ -1,60 +0,0 @@
----
- drivers/usb/host/ohci-ssb.c |   39 ++++++++++++++++++++++++++++++++++++---
- 1 file changed, 36 insertions(+), 3 deletions(-)
-
---- a/drivers/usb/host/ohci-ssb.c
-+++ b/drivers/usb/host/ohci-ssb.c
-@@ -106,10 +106,42 @@ static int ssb_ohci_attach(struct ssb_de
-       int err = -ENOMEM;
-       u32 tmp, flags = 0;
- 
--      if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV)
-+      if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) {
-+              /* Put the device into host-mode. */
-               flags |= SSB_OHCI_TMSLOW_HOSTMODE;
--
--      ssb_device_enable(dev, flags);
-+              ssb_device_enable(dev, flags);
-+      } else if (dev->id.coreid == SSB_DEV_USB20_HOST) {
-+              /*
-+               * USB 2.0 special considerations:
-+               *
-+               * 1. Since the core supports both OHCI and EHCI functions, it must
-+               *    only be reset once.
-+               *
-+               * 2. In addition to the standard SSB reset sequence, the Host Control
-+               *    Register must be programmed to bring the USB core and various
-+               *    phy components out of reset.
-+               */
-+              ssb_device_enable(dev, 0);
-+              ssb_write32(dev, 0x200, 0x7ff);
-+              udelay(1);
-+              if (dev->id.revision == 1) { // bug in rev 1
-+
-+                      /* Change Flush control reg */
-+                      tmp = ssb_read32(dev, 0x400);
-+                      tmp &= ~8;
-+                      ssb_write32(dev, 0x400, tmp);
-+                      tmp = ssb_read32(dev, 0x400);
-+                      printk("USB20H fcr: 0x%0x\n", tmp);
-+
-+                      /* Change Shim control reg */
-+                      tmp = ssb_read32(dev, 0x304);
-+                      tmp &= ~0x100;
-+                      ssb_write32(dev, 0x304, tmp);
-+                      tmp = ssb_read32(dev, 0x304);
-+                      printk("USB20H shim: 0x%0x\n", tmp);
-+              }
-+      } else
-+              ssb_device_enable(dev, 0);
- 
-       hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
-                       dev_name(dev->dev));
-@@ -200,6 +232,7 @@ static int ssb_ohci_resume(struct ssb_de
- static const struct ssb_device_id ssb_ohci_table[] = {
-       SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
-       SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
-+      SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
-       SSB_DEVTABLE_END
- };
- MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);