fix chaostables patch to have headers installed when using 'make -C $(KDIR) headers_i...

[openwrt-10.03/.git] / target / linux / brcm-2.4 / base-files / etc / preinit.arch

diff --git a/target/linux/brcm-2.4/base-files/etc/preinit.arch b/target/linux/brcm-2.4/base-files/etc/preinit.arch
index 43df591ab70f39a0fe7d81930a3961ed06d7bfd8..1b3c924cedef0d311a466bd8b9a2b4d93ef9f676 100755 (executable)
--- a/target/linux/brcm-2.4/base-files/etc/preinit.arch
+++ b/target/linux/brcm-2.4/base-files/etc/preinit.arch
@@ -4,7 +4,7 @@ failsafe() {
        lock /tmp/.failsafe
        failsafe_ip
 
-       echo "0 1 2 3 4 5u*" > /proc/switch/eth0/vlan/0/ports
+       echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
        
        set_state failsafe
        [ -x "/usr/sbin/nvram" ] && {
@@ -34,12 +34,24 @@ case "$(cat /proc/diag/model)" in
        "ASUS WL-HDD") ifname=eth1;;
        "ASUS WL-300g") ifname=eth1;;
        "ASUS (unknown, BCM4702)") ifname=eth1;;
+       "Sitecom WL-105b") ifname=eth1;;
 esac
 
 failsafe_ip
 
+check_module () {
+  module="$1"; shift; params="$*"
+
+  insmod "$module" "$params"
+  sleep 1
+  grep "^$module" /proc/modules
+  return $?
+}
+
 insmod switch-core
-insmod switch-robo || insmod switch-adm || rmmod switch-core
+check_module switch-robo || check_module switch-adm  || { 
+  check_module bcm57xx activate_gpio=0x4 && cpu_port="8u*"
+} || rmmod switch-core
 
 [ -d /proc/switch/eth0 ] && {
        echo 1 > /proc/switch/eth0/reset
@@ -47,7 +59,7 @@ insmod switch-robo || insmod switch-adm || rmmod switch-core
        # this would be easier if we blasted the message across all ports
        # but we don't want packets leaking across interfaces
        for port in $(seq 0 4); do {
-               echo "$port 5u*" > /proc/switch/eth0/vlan/0/ports
+               echo "$port ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
                netmsg 192.168.1.255 "Press reset now, to enter Failsafe!"
        }; done
 } || netmsg 192.168.1.255 "Press reset now, to enter Failsafe!"