strip the kernel version suffix from target directories, except for brcm-2.4 (the...

[openwrt-10.03/.git] / target / linux / adm5120 / files / include / asm-mips / mach-adm5120 / adm5120_intc.h

diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_intc.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_intc.h
new file mode 100644 (file)
index 0000000..4d75259
--- /dev/null
+++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_intc.h
@@ -0,0 +1,76 @@
+/*
+ *  $Id$
+ *
+ *  ADM5120 interrupt controller definitions
+ *
+ *  This header file defines the hardware registers of the ADM5120 SoC
+ *  built-in interrupt controller.
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ */
+
+#ifndef _ADM5120_INTC_H_
+#define _ADM5120_INTC_H_
+
+/*
+ * INTC register offsets
+ */
+#define INTC_REG_IRQ_STATUS            0x00 /* Interrupt status after masking */
+#define INTC_REG_IRQ_RAW_STATUS                0x04 /* Interrupt status before masking */
+#define INTC_REG_IRQ_ENABLE            0x08 /* Used to enable the interrupt sources */
+#define INTC_REG_IRQ_ENABLE_CLEAR      0x0C /* Used to disable the interrupt sources */
+#define INTC_REG_IRQ_DISABLE           INTC_REG_IRQ_ENABLE_CLEAR
+#define INTC_REG_INT_MODE              0x14 /* The interrupt mode of the sources */
+#define INTC_REG_FIQ_STATUS            0x18 /* FIQ status */
+#define INTC_REG_IRQ_TEST_SOURCE       0x1C
+#define INTC_REG_IRQ_SOURCE_SELECT     0x20
+#define INTC_REG_INT_LEVEL             0x24
+
+/*
+ * INTC IRQ numbers
+ */
+#define INTC_IRQ_TIMER 0       /* built in timer */
+#define INTC_IRQ_UART0 1       /* built-in UART0 */
+#define INTC_IRQ_UART1 2       /* built-in UART1 */
+#define INTC_IRQ_USBC  3       /* USB Host Controller */
+#define INTC_IRQ_GPIO2 4       /* GPIO line 2 */
+#define INTC_IRQ_GPIO4 5       /* GPIO line 4 */
+#define INTC_IRQ_PCI0  6       /* PCI slot 2 */
+#define INTC_IRQ_PCI1  7       /* PCI slot 3 */
+#define INTC_IRQ_PCI2  8       /* PCI slot 4 */
+#define INTC_IRQ_SWITCH        9       /* built-in ethernet switch */
+#define INTC_IRQ_LAST  INTC_IRQ_SWITCH
+#define INTC_IRQ_COUNT 10
+
+/*
+ * INTC register bits
+ */
+#define INTC_INT_TIMER ( 1 << INTC_IRQ_TIMER )
+#define INTC_INT_UART0 ( 1 << INTC_IRQ_UART0 )
+#define INTC_INT_UART1 ( 1 << INTC_IRQ_UART1 )
+#define INTC_INT_USBC  ( 1 << INTC_IRQ_USBC )
+#define INTC_INT_INTX0 ( 1 << INTC_IRQ_INTX0 )
+#define INTC_INT_INTX1 ( 1 << INTC_IRQ_INTX1 )
+#define INTC_INT_PCI0  ( 1 << INTC_IRQ_PCI0 )
+#define INTC_INT_PCI1  ( 1 << INTC_IRQ_PCI1 )
+#define INTC_INT_PCI2  ( 1 << INTC_IRQ_PCI2 )
+#define INTC_INT_SWITCH        ( 1 << INTC_IRQ_SWITCH )
+#define INTC_INT_ALL   (( 1 << INTC_IRQ_COUNT)-1)
+
+#endif /* _ADM5120_INTC_H_ */