ramips: remove legacy ethernet driver components for mt7621

[openwrt/.git] / scripts / flashing / flash.sh

diff --git a/scripts/flashing/flash.sh b/scripts/flashing/flash.sh
index 8841c3568464932c88da8ddd3890f1395690ad72..d568ed5b22f2756652eeba15470808e03f51fbe8 100755 (executable)
--- a/scripts/flashing/flash.sh
+++ b/scripts/flashing/flash.sh
@@ -1,6 +1,6 @@
 #!/bin/bash
 #
-# tftp flash script for wireless routers 
+# tftp flash script for wireless routers
 #
 # Copyright (C) 2004 by Oleg I. Vdovikin <oleg@cs.msu.su>
 # Copyright (C) 2005 by Waldemar Brodkorb <wbx@openwrt.org>
@@ -20,14 +20,14 @@
 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
 #
 
-if [ -z "$1" ] || [ ! -f $1 ] || [ -z $2 ]; then
-    echo Usage: $0 firmware vendor
+if [ -z "$1" ] || [ ! -f "$1" ] || [ -z "$2" ]; then
+    echo Usage: "$0" firmware vendor
 cat << EOF
 IMPORTANT:
-Notes for Linksys / Asus WL500gx router: 
+Notes for Linksys / Asus WL500gx router:
    be sure you have set boot_wait to yes. Power on your router
    after executing this script.
- 
+
 Notes for Asus WL500g router:
    be sure POWER led is flashing (If this is not the case
    poweroff the device, push the reset button & power on
@@ -49,18 +49,18 @@ Notes for Toshiba router:
 EOF
     exit 0
 fi
-if [ "$2" == "asus" ]; then
+if [ "$2" = "asus" ]; then
 echo Confirming IP address setting...
 echo -en "get ASUSSPACELINK\x01\x01\xa8\xc0 /dev/null\nquit\n" | tftp 192.168.1.1
-echo Flashing 192.168.1.1 using $1...
+echo Flashing 192.168.1.1 using "$1"...
 echo -en "binary\nput $1 ASUSSPACELINK\nquit\n" | tftp 192.168.1.1
-echo Please wait until leds stops flashing. 
-elif [ "$2" == "linksys" ]; then
-echo Flashing 192.168.1.1 using $1...
+echo Please wait until leds stops flashing.
+elif [ "$2" = "linksys" ]; then
+echo Flashing 192.168.1.1 using "$1"...
 echo -en "rexmt 1\ntrace\nbinary\nput $1\nquit\n" | tftp 192.168.1.1
 echo Please wait until power led stops flashing. Do not poweroff! Then you can login via telnet 192.168.1.1.
-elif [ "$2" == "toshiba" ]; then
-echo Flashing 192.168.10.1 using $1...
+elif [ "$2" = "toshiba" ]; then
+echo Flashing 192.168.10.1 using "$1"...
 echo -en "rexmt 1\ntrace\nbinary\nput $1\nquit\n" | tftp 192.168.10.1
 echo Unit will automatically reboot within 5 minutes.  Do not power off.  Then you can login via telnet 192.168.10.1.
 fi