babeld: migrate from openwrt/packages

[lede-routing/.git] / babeld / files / babeld.conf

diff --git a/babeld/files/babeld.conf b/babeld/files/babeld.conf
new file mode 100644 (file)
index 0000000..746139d
--- /dev/null
+++ b/babeld/files/babeld.conf
@@ -0,0 +1,38 @@
+# babel config file
+#
+# This config file simply documents sample entries. 
+# "redistribute" means: redistribute routes from other routing protocols
+# into babel. "local" means addresses assigned to local interfaces.
+#
+# You do not need to edit this file: you can use /etc/config/babeld
+# instead (sections "interface" and "filter").  Both files can be used
+# simultaneously (the rules of this file are executed first).
+
+# the default rules are:
+#
+## redistribute local 
+## redistribute deny
+#
+# this says, redistribute local addresses but no other routes
+
+
+# redistribute IPv4 default route into babel 
+## redistribute local ip 0.0.0.0/0 le 0 metric 128
+
+# same but for IPv6
+## redistribute local ip ::/0 le 0 metric 128
+
+
+# don't redistribute all local addresses, only selected ones
+# after the first line, the "deny" rules kicks in. After the "deny"
+# no redistribute local rules are going to match
+## redistribute local ip 192.160.4.0/24 
+## redistribute local deny
+
+
+# Babel refuses to redistribute routes with a protocol number of "boot";
+# this is standard practice, and means that you cannot easily
+# redistribute the default route installed by dhcp.  It is however
+# possible to redistribute such route by explicitly specifying "proto 3"
+# on the redistribute line.
+## redistribute ip 0.0.0.0/0 le 0 proto 3 metric 128