diff -Nur linux-2.6.16.4/arch/arm/boot/compressed/head-xscale.S linux-2.6.16.4-owrt/arch/arm/boot/compressed/head-xscale.S --- linux-2.6.16.4/arch/arm/boot/compressed/head-xscale.S 2006-04-11 19:19:28.000000000 +0200 +++ linux-2.6.16.4-owrt/arch/arm/boot/compressed/head-xscale.S 2006-04-16 16:51:05.000000000 +0200 @@ -47,6 +47,11 @@ orr r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00) #endif +#ifdef CONFIG_MACH_GATEWAY7001 + mov r7, #(MACH_TYPE_GATEWAY7001 & 0xff) + orr r7, r7, #(MACH_TYPE_GATEWAY7001 & 0xff00) +#endif + #ifdef CONFIG_ARCH_IXP2000 mov r1, #-1 mov r0, #0xd6000000 diff -Nur linux-2.6.16.4/arch/arm/mach-ixp4xx/gateway7001-pci.c linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/gateway7001-pci.c --- linux-2.6.16.4/arch/arm/mach-ixp4xx/gateway7001-pci.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/gateway7001-pci.c 2006-04-17 19:21:55.000000000 +0200 @@ -0,0 +1,67 @@ +/* + * arch/arch/mach-ixp4xx/gateway7001-pci.c + * + * PCI setup routines for Gateway 7001 + * + * Copyright (C) 2006 Imre Kaloz + * + * based on coyote-pci.c: + * Copyright (C) 2002 Jungo Software Technologies. + * Copyright (C) 2003 MontaVista Softwrae, Inc. + * + * Maintainer: Imre Kaloz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include + +#include +#include +#include + +#include + +extern void ixp4xx_pci_preinit(void); +extern int ixp4xx_setup(int nr, struct pci_sys_data *sys); +extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys); + +void __init gateway7001_pci_preinit(void) +{ + set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW); + set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW); + + ixp4xx_pci_preinit(); +} + +static int __init gateway7001_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + if (slot == 0) + return IRQ_IXP4XX_GPIO10; + else if (slot == 1) + return IRQ_IXP4XX_GPIO11; + else return -1; +} + +struct hw_pci gateway7001_pci __initdata = { + .nr_controllers = 1, + .preinit = gateway7001_pci_preinit, + .swizzle = pci_std_swizzle, + .setup = ixp4xx_setup, + .scan = ixp4xx_scan_bus, + .map_irq = gateway7001_map_irq, +}; + +int __init gateway7001_pci_init(void) +{ + if (machine_is_gateway7001()) + pci_common_init(&gateway7001_pci); + return 0; +} + +subsys_initcall(gateway7001_pci_init); diff -Nur linux-2.6.16.4/arch/arm/mach-ixp4xx/Kconfig linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/Kconfig --- linux-2.6.16.4/arch/arm/mach-ixp4xx/Kconfig 2006-04-11 19:19:28.000000000 +0200 +++ linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/Kconfig 2006-04-16 15:58:37.000000000 +0200 @@ -30,6 +30,13 @@ Engineering Coyote Gateway Reference Platform. For more information on this platform, see . +config MACH_GATEWAY7001 + bool "Gateway 7001" + help + Say 'Y' here if you want your kernel to support Gateway's + 7001 Access Point. For more information on this platform, + see http://openwrt.org + config ARCH_IXDP425 bool "IXDP425" help diff -Nur linux-2.6.16.4/arch/arm/mach-ixp4xx/Makefile linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/Makefile --- linux-2.6.16.4/arch/arm/mach-ixp4xx/Makefile 2006-04-11 19:19:28.000000000 +0200 +++ linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/Makefile 2006-04-16 16:03:42.000000000 +0200 @@ -10,4 +10,5 @@ obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o obj-$(CONFIG_MACH_NAS100D) += nas100d-pci.o nas100d-setup.o nas100d-power.o +obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o coyote-setup.o diff -Nur linux-2.6.16.4/include/asm-arm/arch-ixp4xx/uncompress.h linux-2.6.16.4-owrt/include/asm-arm/arch-ixp4xx/uncompress.h --- linux-2.6.16.4/include/asm-arm/arch-ixp4xx/uncompress.h 2006-04-11 19:19:28.000000000 +0200 +++ linux-2.6.16.4-owrt/include/asm-arm/arch-ixp4xx/uncompress.h 2006-04-16 16:25:34.000000000 +0200 @@ -48,7 +48,7 @@ /* * Coyote and gtwx5715 only have UART2 connected */ - if (machine_is_adi_coyote() || machine_is_gtwx5715()) + if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001()) uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS; else uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS; diff -Nur linux-2.6.16.4/arch/arm/mach-ixp4xx/coyote-setup.c linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/coyote-setup.c --- linux-2.6.16.4/arch/arm/mach-ixp4xx/coyote-setup.c 2006-04-11 19:19:28.000000000 +0200 +++ linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/coyote-setup.c 2006-04-16 16:03:23.000000000 +0200 @@ -1,9 +1,10 @@ /* * arch/arm/mach-ixp4xx/coyote-setup.c * - * Board setup for ADI Engineering and IXDGP425 boards + * Board setup for ADI Engineering, IXDGP425 and Gateway 7001 boards * * Copyright (C) 2003-2005 MontaVista Software, Inc. + * Copyright (C) 2006 Imre Kaloz * * Author: Deepak Saxena */ @@ -111,6 +112,19 @@ MACHINE_END #endif +#ifdef CONFIG_MACH_GATEWAY7001 +MACHINE_START(GATEWAY7001, "Gateway 7001") + /* Maintainer: Imre Kaloz */ + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, + .boot_params = 0x0100, + .init_machine = coyote_init, +MACHINE_END +#endif + /* * IXDPG425 is identical to Coyote except for which serial port * is connected.