--- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -110,6 +110,50 @@ Sun Microsystems boardsets. This driver will require CFI support in the kernel, so if you did not enable CFI previously, do that now. +config MTD_RDC3210 + tristate "CFI Flash device mapped on RDC3210" + depends on X86 && MTD_CFI && MTD_PARTITIONS + help + RDC-3210 is the flash device we find on Ralink reference board. + +config MTD_RDC3210_STATIC_MAP + bool "Partitions on RDC3210 mapped statically" if MTD_RDC3210 + select MTD_RDC3210_FACTORY_PRESENT + help + The mapping driver will use the static partition map for the + RDC-3210 flash device. + +config MTD_RDC3210_FACTORY_PRESENT + bool "Reserve a partition on RDC3210 for factory presets" + depends on MTD_RDC3210 + default y + help + The mapping driver will reserve a partition on the RDC-3210 flash + device for resetting flash contents to factory defaults. + +config MTD_RDC3210_ALLOW_JFFS2 + bool "JFFS2 filesystem usable in a partition on RDC3210" + depends on MTD_RDC3210 && !MTD_RDC3210_STATIC_MAP + help + The mapping driver will align a partition on the RDC-3210 flash + device to an erase-block boundary so that a JFFS2 filesystem may + reside on it. + +config MTD_RDC3210_SIZE + hex "Amount of flash memory on RDC3210" + depends on MTD_RDC3210 + default "0x400000" + help + Total size in bytes of the RDC-3210 flash device + +config MTD_RDC3210_BUSWIDTH + int "Width of CFI Flash device mapped on RDC3210" + depends on MTD_RDC3210 + default "2" + help + Number of bytes addressed on the RDC-3210 flash device before + addressing the same chip again + config MTD_SC520CDP tristate "CFI Flash device mapped on AMD SC520 CDP" depends on X86 && MTD_CFI && MTD_CONCAT --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -29,6 +29,7 @@ obj-$(CONFIG_MTD_PMC_MSP_EVM) += pmcmsp-flash.o obj-$(CONFIG_MTD_PMC_MSP_RAMROOT)+= pmcmsp-ramroot.o obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o +obj-$(CONFIG_MTD_RDC3210) += rdc3210.o obj-$(CONFIG_MTD_RPXLITE) += rpxlite.o obj-$(CONFIG_MTD_TQM8XXL) += tqm8xxl.o obj-$(CONFIG_MTD_SA1100) += sa1100-flash.o