/*   This program is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU General Public License as published by
 *   the Free Software Foundation; version 2 of the License
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU General Public License for more details.
 *
 *   Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
 *   Copyright (C) 2009-2015 Felix Fietkau <nbd@nbd.name>
 *   Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
 */

#include <linux/module.h>

#include <asm/mach-ralink/ralink_regs.h>

#include "mtk_eth_soc.h"
#include "mdio_rt2880.h"

#define RT2880_RESET_FE			BIT(18)

static void rt2880_init_data(struct fe_soc_data *data,
			     struct net_device *netdev)
{
	struct fe_priv *priv = netdev_priv(netdev);

	priv->flags = FE_FLAG_PADDING_64B | FE_FLAG_PADDING_BUG |
		FE_FLAG_JUMBO_FRAME | FE_FLAG_CALIBRATE_CLK;
	netdev->hw_features = NETIF_F_SG | NETIF_F_HW_VLAN_CTAG_TX;
	/* this should work according to the datasheet but actually does not*/
	/* netdev->hw_features |= NETIF_F_IP_CSUM | NETIF_F_RXCSUM; */
}

void rt2880_fe_reset(void)
{
	fe_reset(RT2880_RESET_FE);
}

static int rt2880_fwd_config(struct fe_priv *priv)
{
	int ret;

	ret = fe_set_clock_cycle(priv);
	if (ret)
		return ret;

	fe_fwd_config(priv);
	fe_w32(FE_PSE_FQFC_CFG_INIT, FE_PSE_FQ_CFG);
	fe_csum_config(priv);

	return ret;
}

struct fe_soc_data rt2880_data = {
	.init_data = rt2880_init_data,
	.reset_fe = rt2880_fe_reset,
	.fwd_config = rt2880_fwd_config,
	.pdma_glo_cfg = FE_PDMA_SIZE_8DWORDS,
	.checksum_bit = RX_DMA_L4VALID,
	.rx_int = FE_RX_DONE_INT,
	.tx_int = FE_TX_DONE_INT,
	.status_int = FE_CNT_GDM_AF,
	.mdio_read = rt2880_mdio_read,
	.mdio_write = rt2880_mdio_write,
	.mdio_adjust_link = rt2880_mdio_link_adjust,
	.port_init = rt2880_port_init,
};

const struct of_device_id of_fe_match[] = {
	{ .compatible = "ralink,rt2880-eth", .data = &rt2880_data },
	{},
};

MODULE_DEVICE_TABLE(of, of_fe_match);