Index: linux-2.6.27.3/arch/arm/mach-ixp4xx/Kconfig =================================================================== --- linux-2.6.27.3.orig/arch/arm/mach-ixp4xx/Kconfig 2008-11-05 19:31:20.000000000 +0000 +++ linux-2.6.27.3/arch/arm/mach-ixp4xx/Kconfig 2008-11-05 20:10:26.000000000 +0000 @@ -97,6 +97,14 @@ config MACH_SIDEWINDER Engineering Sidewinder board. For more information on this platform, see http://www.adiengineering.com +config MACH_USR8200 + bool "USRobotics USR8200" + select PCI + help + Say 'Y' here if you want your kernel to support the USRobotics + USR8200 router board. For more information on this platform, see + http://openwrt.org + config MACH_COMPEX bool "Compex WP18 / NP18A" select PCI Index: linux-2.6.27.3/arch/arm/mach-ixp4xx/Makefile =================================================================== --- linux-2.6.27.3.orig/arch/arm/mach-ixp4xx/Makefile 2008-11-05 19:31:20.000000000 +0000 +++ linux-2.6.27.3/arch/arm/mach-ixp4xx/Makefile 2008-11-05 20:10:26.000000000 +0000 @@ -24,6 +24,7 @@ obj-pci-$(CONFIG_MACH_COMPEX) += ixdp42 obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o obj-pci-$(CONFIG_MACH_TW5334) += tw5334-pci.o obj-pci-$(CONFIG_MACH_MI424WR) += mi424wr-pci.o +obj-pci-$(CONFIG_MACH_USR8200) += usr8200-pci.o obj-y += common.o @@ -46,6 +47,7 @@ obj-$(CONFIG_MACH_COMPEX) += compex-setu obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o obj-$(CONFIG_MACH_TW5334) += tw5334-setup.o obj-$(CONFIG_MACH_MI424WR) += mi424wr-setup.o +obj-$(CONFIG_MACH_USR8200) += usr8200-setup.o obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o Index: linux-2.6.27.3/arch/arm/mach-ixp4xx/usr8200-pci.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-2.6.27.3/arch/arm/mach-ixp4xx/usr8200-pci.c 2008-11-05 22:51:20.000000000 +0000 @@ -0,0 +1,78 @@ +/* + * arch/arch/mach-ixp4xx/usr8200-pci.c + * + * PCI setup routines for USRobotics USR8200 + * + * Copyright (C) 2008 Peter Denison + * + * based on pronghorn-pci.c + * Copyright (C) 2008 Imre Kaloz + * based on coyote-pci.c: + * Copyright (C) 2002 Jungo Software Technologies. + * Copyright (C) 2003 MontaVista Softwrae, Inc. + * + * Maintainer: Peter Denison + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include + +#include +#include + +#include + +void __init usr8200_pci_preinit(void) +{ + set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW); + + ixp4xx_pci_preinit(); +} + +static int __init usr8200_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + if (slot == 14) + return IRQ_IXP4XX_GPIO7; + else if (slot == 15) + return IRQ_IXP4XX_GPIO8; + else if (slot == 16) { + if (pin == 1) + return IRQ_IXP4XX_GPIO11; + else if (pin == 2) + return IRQ_IXP4XX_GPIO10; + else if (pin == 3) + return IRQ_IXP4XX_GPIO9; + else + return -1; + } else + return -1; +} + +struct hw_pci usr8200_pci __initdata = { + .nr_controllers = 1, + .preinit = usr8200_pci_preinit, + .swizzle = pci_std_swizzle, + .setup = ixp4xx_setup, + .scan = ixp4xx_scan_bus, + .map_irq = usr8200_map_irq, +}; + +int __init usr8200_pci_init(void) +{ + if (machine_is_usr8200()) + pci_common_init(&usr8200_pci); + return 0; +} + +subsys_initcall(usr8200_pci_init); Index: linux-2.6.27.3/arch/arm/mach-ixp4xx/usr8200-setup.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-2.6.27.3/arch/arm/mach-ixp4xx/usr8200-setup.c 2008-11-05 20:23:32.000000000 +0000 @@ -0,0 +1,187 @@ +/* + * arch/arm/mach-ixp4xx/usr8200-setup.c + * + * Board setup for the USRobotics USR8200 + * + * Copyright (C) 2008 Peter Denison + * + * based on pronghorn-setup.c: + * Copyright (C) 2008 Imre Kaloz + * based on coyote-setup.c: + * Copyright (C) 2003-2005 MontaVista Software, Inc. + * + * Author: Peter Denison + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +static struct flash_platform_data usr8200_flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource usr8200_flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device usr8200_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev = { + .platform_data = &usr8200_flash_data, + }, + .num_resources = 1, + .resource = &usr8200_flash_resource, +}; + +static struct resource usr8200_uart_resources [] = { + { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM + }, + { + .start = IXP4XX_UART1_BASE_PHYS, + .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM + } +}; + +static struct plat_serial8250_port usr8200_uart_data[] = { + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { + .mapbase = IXP4XX_UART1_BASE_PHYS, + .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { }, +}; + +static struct platform_device usr8200_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = usr8200_uart_data, + }, + .num_resources = 2, + .resource = usr8200_uart_resources, +}; + +/* +static struct i2c_gpio_platform_data usr8200_i2c_gpio_data = { + .sda_pin = 9, + .scl_pin = 10, +}; + +static struct platform_device usr8200_i2c_gpio = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &usr8200_i2c_gpio_data, + }, +}; + +static struct gpio_led usr8200_led_pin[] = { + { + .name = "usr8200:green:status", + .gpio = 7, + } +}; + +static struct gpio_led_platform_data usr8200_led_data = { + .num_leds = 1, + .leds = usr8200_led_pin, +}; + +static struct platform_device usr8200_led = { + .name = "leds-gpio", + .id = -1, + .dev.platform_data = &usr8200_led_data, +}; +*/ + +static struct eth_plat_info usr8200_plat_eth[] = { + { + .phy = 16, + .rxq = 4, + .txreadyq = 21, + }, { + .phy = 9, + .rxq = 3, + .txreadyq = 20, + } +}; + +static struct platform_device usr8200_eth[] = { + { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEC, + .dev.platform_data = usr8200_plat_eth, + }, { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEB, + .dev.platform_data = usr8200_plat_eth + 1, + } +}; + +static struct platform_device *usr8200_devices[] __initdata = { + &usr8200_flash, + &usr8200_uart, +/* &usr8200_led, + &usr8200_i2c_gpio, */ + &usr8200_eth[0], + &usr8200_eth[1], +}; + +static void __init usr8200_init(void) +{ + ixp4xx_sys_init(); + + usr8200_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + usr8200_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_64M - 1; + + *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; + *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; + + platform_add_devices(usr8200_devices, ARRAY_SIZE(usr8200_devices)); +} + +MACHINE_START(USR8200, "USRobotics USR8200") + /* Maintainer: Peter Denison */ + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, + .boot_params = 0x0100, + .init_machine = usr8200_init, +MACHINE_END Index: linux-2.6.27.3/arch/arm/mach-ixp4xx/include/mach/uncompress.h =================================================================== --- linux-2.6.27.3.orig/arch/arm/mach-ixp4xx/include/mach/uncompress.h 2008-11-05 20:11:38.000000000 +0000 +++ linux-2.6.27.3/arch/arm/mach-ixp4xx/include/mach/uncompress.h 2008-11-05 20:12:11.000000000 +0000 @@ -43,7 +43,7 @@ static __inline__ void __arch_decomp_set if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2() || machine_is_pronghorn() || machine_is_pronghorn_metro() || machine_is_wrt300nv2() || - machine_is_tw5334()) + machine_is_tw5334() || machine_is_usr8200()) uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS; else uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;