diff -Naur linux-2.6.19.1/arch/arm/boot/compressed/head-at91rm9200.S linux/arch/arm/boot/compressed/head-at91rm9200.S --- linux-2.6.19.1/arch/arm/boot/compressed/head-at91rm9200.S 2006-12-11 20:32:53.000000000 +0100 +++ linux/arch/arm/boot/compressed/head-at91rm9200.S 2007-01-20 10:26:21.000000000 +0100 @@ -61,6 +61,12 @@ cmp r7, r3 beq 99f + @ FDL Versalink : 1053 + mov r3, #(MACH_TYPE_VLINK & 0xff) + orr r3, r3, #(MACH_TYPE_VLINK & 0xff00) + cmp r7, r3 + beq 99f + @ Ajeco 1ARM : 1075 mov r3, #(MACH_TYPE_ONEARM & 0xff) orr r3, r3, #(MACH_TYPE_ONEARM & 0xff00) diff -Naur linux-2.6.19.1/arch/arm/mach-at91rm9200/board-vlink.c linux/arch/arm/mach-at91rm9200/board-vlink.c --- linux-2.6.19.1/arch/arm/mach-at91rm9200/board-vlink.c 1970-01-01 01:00:00.000000000 +0100 +++ linux/arch/arm/mach-at91rm9200/board-vlink.c 2007-01-19 21:18:00.000000000 +0100 @@ -0,0 +1,144 @@ +/* + * linux/arch/arm/mach-at91rm9200/board-ek.c + * + * Copyright (C) 2006,2007 Hamish Guthrie + * Guthrie Consulting. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +#include "generic.h" + + +/* + * Serial port configuration. + * 0 .. 3 = USART0 .. USART3 + * 4 = DBGU + */ +static struct at91_uart_config __initdata vlink_uart_config = { + .console_tty = 0, /* ttyS0 */ + .nr_tty = 5, + .tty_map = { 4, 1, 0, 3, 2 } /* ttyS0, ..., ttyS4 */ +}; + +static void __init vlink_map_io(void) +{ + /* Initialize processor: 18.432 MHz crystal */ + at91rm9200_initialize(18432000, AT91RM9200_PQFP); + + /* Setup the LEDs */ +// at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2); + + /* Setup the serial ports and console */ + at91_init_serial(&vlink_uart_config); +} + +static void __init vlink_init_irq(void) +{ + at91rm9200_init_interrupts(NULL); +} + +static struct eth_platform_data __initdata vlink_eth_data = { + .phy_irq_pin = AT91_PIN_PC4, + .is_rmii = 1, +}; + +static struct at91_usbh_data __initdata vlink_usbh_data = { + .ports = 1, +}; + +static struct at91_udc_data __initdata vlink_udc_data = { + .vbus_pin = AT91_PIN_PD4, + .pullup_pin = AT91_PIN_PD5, +}; + +/*static struct at91_mmc_data __initdata ek_mmc_data = { + .det_pin = AT91_PIN_PB27, + .is_b = 0, + .wire4 = 1, + .wp_pin = AT91_PIN_PA17, +}; +*/ + +static struct spi_board_info vlink_spi_devices[] = { + { /* DataFlash chip */ + .modalias = "mtd_dataflash", + .chip_select = 0, + .max_speed_hz = 15 * 1000 * 1000, + }, +#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD + { /* DataFlash card */ + .modalias = "mtd_dataflash", + .chip_select = 3, + .max_speed_hz = 15 * 1000 * 1000, + }, +#endif +}; + +static void __init vlink_board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + /* Ethernet */ + at91_add_device_eth(&vlink_eth_data); + /* USB Host */ + at91_add_device_usbh(&vlink_usbh_data); + /* USB Device */ + at91_add_device_udc(&vlink_udc_data); + at91_set_multi_drive(vlink_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */ + /* I2C */ + at91_add_device_i2c(); + /* SPI */ + at91_add_device_spi(vlink_spi_devices, ARRAY_SIZE(vlink_spi_devices)); +#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD + /* DataFlash card */ +// at91_set_gpio_output(AT91_PIN_PB22, 0); +#else + /* MMC */ +// at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ +// at91_add_device_mmc(&vlink_mmc_data); +#endif + /* VGA */ +} + +MACHINE_START(VLINK, "FDL VersaLink") + /* Maintainer: Guthrie Consulting */ + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91rm9200_timer, + .map_io = vlink_map_io, + .init_irq = vlink_init_irq, + .init_machine = vlink_board_init, +MACHINE_END diff -Naur linux-2.6.19.1/arch/arm/mach-at91rm9200/Kconfig linux/arch/arm/mach-at91rm9200/Kconfig --- linux-2.6.19.1/arch/arm/mach-at91rm9200/Kconfig 2006-12-11 20:32:53.000000000 +0100 +++ linux/arch/arm/mach-at91rm9200/Kconfig 2007-01-19 21:17:49.000000000 +0100 @@ -82,6 +82,12 @@ help Select this if you are using Sperry-Sun's KAFA board. +config MACH_VLINK + bool "Figment Design Labs VersaLink" + depends on ARCH_AT91RM9200 + help + Select this if you are using FDL's VersaLink board + endif # ---------------------------------------------------------- diff -Naur linux-2.6.19.1/arch/arm/mach-at91rm9200/Makefile linux/arch/arm/mach-at91rm9200/Makefile --- linux-2.6.19.1/arch/arm/mach-at91rm9200/Makefile 2006-12-11 20:32:53.000000000 +0100 +++ linux/arch/arm/mach-at91rm9200/Makefile 2007-01-19 21:17:42.000000000 +0100 @@ -24,6 +24,7 @@ obj-$(CONFIG_MACH_KB9200) += board-kb9202.o obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o obj-$(CONFIG_MACH_KAFA) += board-kafa.o +obj-$(CONFIG_MACH_VLINK) += board-vlink.o # AT91SAM9260 board-specific support