--- linux-2.6.25.10.n/arch/arm/mach-at91/Kconfig 2008-07-04 13:07:01.000000000 +0200 +++ linux-2.6.25.10/arch/arm/mach-at91/Kconfig 2008-07-03 13:44:35.000000000 +0200 @@ -151,6 +151,12 @@ help Select this if you are using Toptech's TT9200 board. +config MACH_VLINK + bool "Figment Design Labs VersaLink" + depends on ARCH_AT91RM9200 + help + Select this if you are using FDL's VersaLink board + endif # ---------------------------------------------------------- --- linux-2.6.25.10.n/arch/arm/mach-at91/Makefile 2008-07-04 13:05:05.000000000 +0200 +++ linux-2.6.25.10/arch/arm/mach-at91/Makefile 2008-07-03 13:44:35.000000000 +0200 @@ -29,6 +29,7 @@ obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o obj-$(CONFIG_MACH_KAFA) += board-kafa.o obj-$(CONFIG_MACH_CHUB) += board-chub.o +obj-$(CONFIG_MACH_VLINK) += board-vlink.o obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o obj-$(CONFIG_MACH_HOMEMATIC) += board-homematic.o obj-$(CONFIG_MACH_ECBAT91) += board-ecbat91.o --- linux-2.6.25.10.n/arch/arm/mach-at91/board-vlink.c 2008-07-04 13:06:19.000000000 +0200 +++ linux-2.6.25.10/arch/arm/mach-at91/board-vlink.c 2008-07-04 12:45:48.000000000 +0200 @@ -0,0 +1,201 @@ +/* + * linux/arch/arm/mach-at91/board-vlink.c + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2006,2007 Guthrie Consulting + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include "generic.h" + + +static void __init vlink_map_io(void) +{ + /* Initialize processor: 18.432 MHz crystal */ + at91rm9200_initialize(18432000, AT91RM9200_PQFP); + + /* Setup the LEDs */ + at91_init_leds(AT91_PIN_PC14, AT91_PIN_PC15); + + /* Setup serial ports */ + + /* DBGU on ttyS0. (RX and TX only) */ + at91_register_uart(0, 0, 0); + + /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DSR, DTR, DCD, RI) */ + at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS + | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR + | ATMEL_UART_DCD | ATMEL_UART_RI); + + /* USART0 on ttys2. (Rx, Tx, CTS, RTS, DTR, DCD, RI) */ + at91_register_uart(AT91RM9200_ID_US0, 2, ATMEL_UART_CTS + | ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI); + + /* USART3 on ttyS3. (Rx, Tx, CTS, RTS, DTR, DCD, RI) */ + at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS + | ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI); + + /* USART2 on ttyS4. (Rx and Tx only) */ + at91_register_uart(AT91RM9200_ID_US2, 4, 0); + + /* Console on ttyS0 (ie DBGU) */ + at91_set_serial_console(0); +} + +static void __init vlink_init_irq(void) +{ + at91rm9200_init_interrupts(NULL); +} + +static struct at91_eth_data __initdata vlink_eth_data = { + .phy_irq_pin = AT91_PIN_PC4, + .is_rmii = 1, +}; + +static struct at91_usbh_data __initdata vlink_usbh_data = { + .ports = 1, +}; + +/* +static struct at91_udc_data __initdata vlink_udc_data = { + .vbus_pin = AT91_PIN_PD4, + .pullup_pin = AT91_PIN_PD5, +}; +*/ + +static struct at91_mmc_data __initdata vlink_mmc_data = { +// .det_pin = AT91_PIN_PB27, + .slot_b = 0, + .wire4 = 1, +// .wp_pin = AT91_PIN_PA17, +}; + +static struct spi_board_info vlink_spi_devices[] = { + { /* DataFlash chip */ + .modalias = "mtd_dataflash", + .chip_select = 0, + .max_speed_hz = 15 * 1000 * 1000, + }, +#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD + { /* DataFlash card */ + .modalias = "mtd_dataflash", + .chip_select = 3, + .max_speed_hz = 15 * 1000 * 1000, + }, +#endif +}; + +/*static struct at91_gpio_led vlink_leds[] = { + { + .name = "led0", + .gpio = AT91_PIN_PC14, + .trigger = "heartbeat", + }, + { + .name = "led1", + .gpio = AT91_PIN_PC15, + .trigger = "timer", + } +}; +*/ + +static void __init vlink_board_init(void) +{ + /* Serial */ + at91_add_device_serial(); + /* Ethernet */ + at91_add_device_eth(&vlink_eth_data); + /* USB Host */ + at91_add_device_usbh(&vlink_usbh_data); + /* USB Device */ +// at91_add_device_udc(&vlink_udc_data); +// at91_set_multi_drive(vlink_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */ + /* I2C */ +// at91_add_device_i2c(); + /* SPI */ + at91_add_device_spi(vlink_spi_devices, ARRAY_SIZE(vlink_spi_devices)); +#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD + /* DataFlash card */ +// at91_set_gpio_output(AT91_PIN_PB22, 0); +#else + /* MMC */ +// at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ + at91_add_device_mmc(0, &vlink_mmc_data); +#endif + /* LEDs */ +// at91_gpio_leds(vlink_leds, ARRAY_SIZE(vlink_leds)); + +/* Other LED's */ + at91_set_gpio_output(AT91_PIN_PC7, 1); // LED FRONT AP1 + at91_set_gpio_output(AT91_PIN_PC8, 1); // LED FRONT BP1 + at91_set_gpio_output(AT91_PIN_PB14, 1); // LED BACK AP1 + at91_set_gpio_output(AT91_PIN_PB15, 1); // LED BACK BP1 + at91_set_gpio_output(AT91_PIN_PB16, 1); // LED BACK AP2 + at91_set_gpio_output(AT91_PIN_PB17, 1); // LED BACK BP2 + +/* SIM Cards */ + at91_set_gpio_output(AT91_PIN_PB9, 1); // ENBSC3 + at91_set_gpio_output(AT91_PIN_PB10, 1); // ENBSC2 + at91_set_gpio_output(AT91_PIN_PB11, 1); // ENBSC1 + +/* GSM Module Control */ + at91_set_gpio_output(AT91_PIN_PB12, 1); // GSMONOFF + +/* Test jig presence detection */ + at91_set_gpio_input(AT91_PIN_PB8, 1); // JIGPRESENT + +/* Power indicator */ + at91_set_gpio_input(AT91_PIN_PB22, 1); // PWR_IND + +/* USB Device control */ + at91_set_gpio_input(AT91_PIN_PB27, 1); // UDB_CNX + at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP + at91_set_multi_drive(AT91_PIN_PB28, 1); // Set to multi-drive + +} + +MACHINE_START(VLINK, "FDL VersaLink") + /* Maintainer: Guthrie Consulting */ + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91rm9200_timer, + .map_io = vlink_map_io, + .init_irq = vlink_init_irq, + .init_machine = vlink_board_init, +MACHINE_END