/*
 *  D-Link DIR-615 rev C1 board support
 *
 *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
 *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
 *
 *  This program is free software; you can redistribute it and/or modify it
 *  under the terms of the GNU General Public License version 2 as published
 *  by the Free Software Foundation.
 */

#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>

#include <asm/mips_machine.h>

#include <asm/mach-ar71xx/ar71xx.h>

#include "devices.h"
#include "dev-m25p80.h"
#include "dev-ar913x-wmac.h"

#define DIR_615C1_GPIO_LED_ORANGE_STATUS 1	/* ORANGE:STATUS:TRICOLOR */
#define DIR_615C1_GPIO_LED_BLUE_WPS	3	/* BLUE:WPS */
#define DIR_615C1_GPIO_LED_GREEN_WAN	4       /* GREEN:WAN:TRICOLOR */
#define DIR_615C1_GPIO_LED_GREEN_WANCPU	5       /* GREEN:WAN:CPU:TRICOLOR */
#define DIR_615C1_GPIO_LED_GREEN_WLAN	6	/* GREEN:WLAN */
#define DIR_615C1_GPIO_LED_GREEN_STATUS	14	/* GREEN:STATUS:TRICOLOR */
#define DIR_615C1_GPIO_LED_ORANGE_WAN	15	/* ORANGE:WAN:TRICOLOR */

/* buttons may need refinement */

#define DIR_615C1_GPIO_BTN_WPS		12
#define DIR_615C1_GPIO_BTN_RESET	21

#define DIR_615C1_BUTTONS_POLL_INTERVAL	20

#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition dir_615c1_partitions[] = {
	{
		.name		= "u-boot",
		.offset		= 0,
		.size		= 0x020000,
		.mask_flags	= MTD_WRITEABLE,
	} , {
		.name		= "config",
		.offset		= 0x020000,
		.size		= 0x010000,
	} , {
		.name		= "kernel",
		.offset		= 0x030000,
		.size		= 0x0d0000,
	} , {
		.name		= "rootfs",
		.offset		= 0x100000,
		.size		= 0x2f0000,
	} , {
		.name		= "art",
		.offset		= 0x3f0000,
		.size		= 0x010000,
		.mask_flags	= MTD_WRITEABLE,
	} , {
		.name		= "firmware",
		.offset		= 0x030000,
		.size		= 0x3c0000,
	}
};
#endif /* CONFIG_MTD_PARTITIONS */

static struct flash_platform_data dir_615c1_flash_data = {
#ifdef CONFIG_MTD_PARTITIONS
        .parts          = dir_615c1_partitions,
        .nr_parts       = ARRAY_SIZE(dir_615c1_partitions),
#endif
};

static struct gpio_led dir_615c1_leds_gpio[] __initdata = {
	{
		.name		= "dir-615c1:orange:status",
		.gpio		= DIR_615C1_GPIO_LED_ORANGE_STATUS,
		.active_low	= 1,
	}, {
		.name		= "dir-615c1:blue:wps",
		.gpio		= DIR_615C1_GPIO_LED_BLUE_WPS,
		.active_low	= 1,
	}, {
		.name		= "dir-615c1:green:wan",
		.gpio		= DIR_615C1_GPIO_LED_GREEN_WAN,
		.active_low	= 1,
	}, {
		.name		= "dir-615c1:green:wancpu",
		.gpio		= DIR_615C1_GPIO_LED_GREEN_WANCPU,
		.active_low	= 1,
        }, {
		.name		= "dir-615c1:green:wlan",
		.gpio		= DIR_615C1_GPIO_LED_GREEN_WLAN,
		.active_low	= 1,
        }, {
		.name           = "dir-615c1:green:status",
		.gpio           = DIR_615C1_GPIO_LED_GREEN_STATUS,
		.active_low     = 1,
	}, {
		.name		= "dir-615c1:orange:wan",
		.gpio		= DIR_615C1_GPIO_LED_ORANGE_WAN,
		.active_low	= 1,
	}

};

static struct gpio_button dir_615c1_gpio_buttons[] __initdata = {
	{
		.desc		= "reset",
		.type		= EV_KEY,
		.code		= BTN_0,
		.threshold	= 5,
		.gpio		= DIR_615C1_GPIO_BTN_RESET,
	}, {
		.desc		= "wps",
		.type		= EV_KEY,
		.code		= BTN_1,
		.threshold	= 5,
		.gpio		= DIR_615C1_GPIO_BTN_WPS,
	}
};

static void __init dir_615c1_setup(void)
{
	ar71xx_add_device_mdio(0x0);

	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
	ar71xx_eth0_data.phy_mask = 0xf;
	ar71xx_eth0_data.speed = SPEED_100;
	ar71xx_eth0_data.duplex = DUPLEX_FULL;

	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
	ar71xx_eth1_data.phy_mask = 0x10;

	ar71xx_add_device_eth(0);
	ar71xx_add_device_eth(1);

	ar71xx_add_device_m25p80(&dir_615c1_flash_data);

	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir_615c1_leds_gpio),
					dir_615c1_leds_gpio);

	ar71xx_add_device_gpio_buttons(-1, DIR_615C1_BUTTONS_POLL_INTERVAL,
					ARRAY_SIZE(dir_615c1_gpio_buttons),
					dir_615c1_gpio_buttons);

	ar913x_add_device_wmac();
}

MIPS_MACHINE(AR71XX_MACH_DIR_615_C1, "D-Link DIR-615 rev. C1", dir_615c1_setup);