--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -33,6 +33,7 @@
 #include <linux/skbuff.h>
 #include <linux/mii.h>
 #include <linux/phy.h>
+#include <linux/phy_fixed.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <asm/gpio.h>
@@ -217,6 +218,12 @@ static void cpmac_hw_stop(struct net_dev
 static int cpmac_stop(struct net_device *dev);
 static int cpmac_open(struct net_device *dev);
 
+static struct fixed_phy_status fixed_phy_status = {
+	.link = 1,
+	.speed = 100,
+	.duplex = 1,
+};
+
 static void cpmac_dump_regs(struct net_device *dev)
 {
 	int i;
@@ -1122,12 +1129,39 @@ static int __devinit cpmac_probe(struct
 		strncpy(mdio_bus_id, cpmac_mii->id, MII_BUS_ID_SIZE);
 		break;
 	}
-	
-	if (phy_id == PHY_MAX_ADDR) {
-		dev_err(&pdev->dev, "no PHY present\n");
-		return -ENODEV;
+
+	if (phy_id < PHY_MAX_ADDR)
+		goto dev_alloc;
+
+	dev_info(&pdev->dev, "trying external MII\n");
+	/* Now disable EPHY and enable MII */
+	ar7_device_disable(AR7_RESET_BIT_EPHY);
+	*(unsigned long*) ioremap(0x08611A08, 4) |= 0x00000001;
+
+	for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
+		if (!(pdata->phy_mask & (1 << phy_id)))
+			continue;
+		if (!cpmac_mii->phy_map[phy_id])
+			continue;
+		strncpy(mdio_bus_id, cpmac_mii->id, MII_BUS_ID_SIZE);
+		break;
+	}
+
+	if (phy_id < PHY_MAX_ADDR)
+		goto dev_alloc;
+
+	/* This still does not work, so now we register a fixed phy */
+	dev_info(&pdev->dev, "using fixed PHY\n");
+	rc = fixed_phy_add(PHY_POLL, pdev->id, &fixed_phy_status);
+	if (rc && rc != -ENODEV) {
+		dev_err(&pdev->dev, "unable to register fixed PHY\n");
+		return rc;
 	}
 
+	strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE); /* fixed phys bus */
+	phy_id = pdev->id;
+
+dev_alloc:
 	dev = alloc_etherdev_mq(sizeof(*priv), CPMAC_QUEUES);
 
 	if (!dev) {