/* * $Id$ * * Cellvision/SparkLAN boards * * Copyright (C) 2007 OpenWrt.org * Copyright (C) 2007 Gabor Juhos * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, * Boston, MA 02110-1301, USA. * */ #include #include #include #include #include #include static void switch_bank_gpio5(unsigned bank) { switch (bank) { case 0: gpio_set_value(ADM5120_GPIO_PIN5, 0); break; case 1: gpio_set_value(ADM5120_GPIO_PIN5, 1); break; } } static struct mtd_partition cas6xx_partitions[] = { { .name = "admboot", .offset = 0, .size = 32*1024, .mask_flags = MTD_WRITEABLE, } , { .name = "config", .offset = MTDPART_OFS_APPEND, .size = 32*1024, } , { .name = "nvfs1", .offset = MTDPART_OFS_APPEND, .size = 64*1024, } , { .name = "nvfs2", .offset = MTDPART_OFS_APPEND, .size = 64*1024, } , { .name = "firmware", .offset = MTDPART_OFS_APPEND, .size = MTDPART_SIZ_FULL, } }; static struct mtd_partition cas7xx_partitions[] = { { .name = "admboot", .offset = 0, .size = 32*1024, .mask_flags = MTD_WRITEABLE, } , { .name = "config", .offset = MTDPART_OFS_APPEND, .size = 32*1024, } , { .name = "nvfs", .offset = MTDPART_OFS_APPEND, .size = 128*1024, } , { .name = "firmware", .offset = MTDPART_OFS_APPEND, .size = MTDPART_SIZ_FULL, } }; static struct platform_device *cas6xx_devices[] __initdata = { &adm5120_flash0_device, }; static struct platform_device *cas7xx_devices[] __initdata = { &adm5120_flash0_device, }; static void __init cas6xx_setup(void) { gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ gpio_direction_output(ADM5120_GPIO_PIN5, 0); /* setup data for flash0 device */ adm5120_flash0_data.switch_bank = switch_bank_gpio5; adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas6xx_partitions); adm5120_flash0_data.parts = cas6xx_partitions; /* TODO: setup mac address */ } static void __init cas7xx_setup(void) { gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ gpio_direction_output(ADM5120_GPIO_PIN5, 0); /* setup data for flash0 device */ adm5120_flash0_data.switch_bank = switch_bank_gpio5; adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas7xx_partitions); adm5120_flash0_data.parts = cas7xx_partitions; /* TODO: setup mac address */ } static struct adm5120_board cas630_board __initdata = { .mach_type = MACH_ADM5120_CAS630, .name = "Cellvision CAS-630/630W", .board_setup = cas6xx_setup, .eth_num_ports = 1, .num_devices = ARRAY_SIZE(cas6xx_devices), .devices = cas6xx_devices, }; static struct adm5120_board cas670_board __initdata = { .mach_type = MACH_ADM5120_CAS670, .name = "Cellvision CAS-670/670W", .board_setup = cas6xx_setup, .eth_num_ports = 1, .num_devices = ARRAY_SIZE(cas6xx_devices), .devices = cas6xx_devices, }; static struct adm5120_board cas700_board __initdata = { .mach_type = MACH_ADM5120_CAS700, .name = "Cellvision CAS-700/700W", .board_setup = cas7xx_setup, .eth_num_ports = 1, .num_devices = ARRAY_SIZE(cas7xx_devices), .devices = cas7xx_devices, }; static struct adm5120_board cas771_board __initdata = { .mach_type = MACH_ADM5120_CAS771, .name = "Cellvision CAS-771/771W", .board_setup = cas7xx_setup, .eth_num_ports = 1, .num_devices = ARRAY_SIZE(cas7xx_devices), .devices = cas7xx_devices, }; static struct adm5120_board cas790_board __initdata = { .mach_type = MACH_ADM5120_CAS790, .name = "Cellvision CAS-790", .board_setup = cas7xx_setup, .eth_num_ports = 1, .num_devices = ARRAY_SIZE(cas7xx_devices), .devices = cas7xx_devices, }; static struct adm5120_board cas861_board __initdata = { .mach_type = MACH_ADM5120_CAS861, .name = "Cellvision CAS-861/861W", .board_setup = cas7xx_setup, .eth_num_ports = 1, .num_devices = ARRAY_SIZE(cas7xx_devices), .devices = cas7xx_devices, }; static int __init register_boards(void) { adm5120_board_register(&cas630_board); adm5120_board_register(&cas670_board); adm5120_board_register(&cas700_board); adm5120_board_register(&cas771_board); adm5120_board_register(&cas790_board); adm5120_board_register(&cas861_board); return 0; } pure_initcall(register_boards);