--- a/src/mei/ifxmips_atm_core.c
+++ b/src/mei/ifxmips_atm_core.c
@@ -58,9 +58,8 @@
 /*
  *  Chip Specific Head File
  */
-#include <asm/ifx/ifx_types.h>
-#include <asm/ifx/ifx_regs.h>
-#include <asm/ifx/common_routines.h>
+#include <ifxmips.h>
+#include <ifxmips_cgu.h>
 #include "ifxmips_atm_core.h"
 
 
@@ -1146,7 +1145,7 @@ static INLINE void mailbox_signal(unsign
 
 static void set_qsb(struct atm_vcc *vcc, struct atm_qos *qos, unsigned int queue)
 {
-    unsigned int qsb_clk = ifx_get_fpi_hz();
+    unsigned int qsb_clk = ifxmips_get_fpi_hz();
     unsigned int qsb_qid = queue + FIRST_QSB_QID;
     union qsb_queue_parameter_table qsb_queue_parameter_table = {{0}};
     union qsb_queue_vbr_parameter_table qsb_queue_vbr_parameter_table = {{0}};
@@ -1318,7 +1317,7 @@ static void set_qsb(struct atm_vcc *vcc,
 
 static void qsb_global_set(void)
 {
-    unsigned int qsb_clk = ifx_get_fpi_hz();
+    unsigned int qsb_clk = ifxmips_get_fpi_hz();
     int i;
     unsigned int tmp1, tmp2, tmp3;
 
@@ -2505,3 +2504,4 @@ static void __exit ifx_atm_exit(void)
 
 module_init(ifx_atm_init);
 module_exit(ifx_atm_exit);
+MODULE_LICENSE("Dual BSD/GPL");
--- a/src/mei/ifxmips_atm_ppe_common.h
+++ b/src/mei/ifxmips_atm_ppe_common.h
@@ -1,9 +1,10 @@
 #ifndef IFXMIPS_ATM_PPE_COMMON_H
 #define IFXMIPS_ATM_PPE_COMMON_H
 
-
-
-#if defined(CONFIG_DANUBE)
+#if defined(CONFIG_IFXMIPS)
+  #include "ifxmips_atm_ppe_danube.h"
+  #define CONFIG_DANUBE
+#elif defined(CONFIG_DANUBE) 
   #include "ifxmips_atm_ppe_danube.h"
 #elif defined(CONFIG_AMAZON_SE)
   #include "ifxmips_atm_ppe_amazon_se.h"
@@ -16,7 +17,6 @@
 #endif
 
 
-
 /*
  *  Code/Data Memory (CDM) Interface Configuration Register
  */
--- a/src/mei/ifxmips_atm_core.h
+++ b/src/mei/ifxmips_atm_core.h
@@ -25,8 +25,8 @@
 #define IFXMIPS_ATM_CORE_H
 
 
-
-#include <asm/ifx/ifx_atm.h>
+#include "ifxmips_compat.h"
+#include "ifx_atm.h"
 #include "ifxmips_atm_ppe_common.h"
 #include "ifxmips_atm_fw_regs_common.h"
 
--- /dev/null
+++ b/src/mei/ifxmips_compat.h
@@ -0,0 +1,43 @@
+#ifndef _IFXMIPS_COMPAT_H__
+#define _IFXMIPS_COMPAT_H__
+
+#define	IFX_SUCCESS	0
+#define IFX_ERROR	(-1)
+
+#define ATM_VBR_NRT     ATM_VBR
+#define ATM_VBR_RT      6
+#define ATM_UBR_PLUS    7
+#define ATM_GFR         8
+
+#define NUM_ENTITY(x)	(sizeof(x) / sizeof(*(x)))
+
+#define SET_BITS(x, msb, lsb, value)	\
+    (((x) & ~(((1 << ((msb) + 1)) - 1) ^ ((1 << (lsb)) - 1))) | (((value) & ((1 << (1 + (msb) - (lsb))) - 1)) << (lsb)))
+
+
+#define IFX_PMU_ENABLE    1
+#define IFX_PMU_DISABLE   0
+
+#define IFX_PMU_MODULE_DSL_DFE    (1 << 9)
+#define IFX_PMU_MODULE_AHBS		  (1 << 13)
+#define IFX_PMU_MODULE_PPE_QSB    (1 << 18)
+#define IFX_PMU_MODULE_PPE_SLL01  (1 << 19)
+#define IFX_PMU_MODULE_PPE_TC     (1 << 21)
+#define IFX_PMU_MODULE_PPE_EMA    (1 << 22)
+#define IFX_PMU_MODULE_PPE_TOP    (1 << 29)
+
+#define ifx_pmu_set(a,b)	{if(a == IFX_PMU_ENABLE) ifxmips_pmu_enable(b); else ifxmips_pmu_disable(b);}
+
+#define PPE_TOP_PMU_SETUP(__x)    ifx_pmu_set(IFX_PMU_MODULE_PPE_TOP, (__x))
+#define PPE_SLL01_PMU_SETUP(__x)  ifx_pmu_set(IFX_PMU_MODULE_PPE_SLL01, (__x))
+#define PPE_TC_PMU_SETUP(__x)     ifx_pmu_set(IFX_PMU_MODULE_PPE_TC, (__x))
+#define PPE_EMA_PMU_SETUP(__x)    ifx_pmu_set(IFX_PMU_MODULE_PPE_EMA, (__x))
+#define PPE_QSB_PMU_SETUP(__x)    ifx_pmu_set(IFX_PMU_MODULE_PPE_QSB, (__x))
+#define PPE_TPE_PMU_SETUP(__x)    ifx_pmu_set(IFX_PMU_MODULE_AHBS, (__x))
+#define DSL_DFE_PMU_SETUP(__x)    ifx_pmu_set(IFX_PMU_MODULE_DSL_DFE, (__x))
+
+#define IFX_REG_W32(_v, _r)               __raw_writel((_v), (_r))
+
+#define CONFIG_IFXMIPS_DSL_CPE_MEI	y
+
+#endif
--- a/src/mei/ifxmips_atm_ppe_danube.h
+++ b/src/mei/ifxmips_atm_ppe_danube.h
@@ -1,7 +1,7 @@
 #ifndef IFXMIPS_ATM_PPE_DANUBE_H
 #define IFXMIPS_ATM_PPE_DANUBE_H
 
-
+#include <ifxmips_irq.h>
 
 /*
  *  FPI Configuration Bus Register and Memory Address Mapping
@@ -93,7 +93,7 @@
 /*
  *  Mailbox IGU1 Interrupt
  */
-#define PPE_MAILBOX_IGU1_INT            INT_NUM_IM2_IRL24
+#define PPE_MAILBOX_IGU1_INT            IFXMIPS_PPE_MBOX_INT
 
 
 
--- a/src/mei/ifxmips_atm_danube.c
+++ b/src/mei/ifxmips_atm_danube.c
@@ -45,10 +45,9 @@
 /*
  *  Chip Specific Head File
  */
-#include <asm/ifx/ifx_types.h>
-#include <asm/ifx/ifx_regs.h>
-#include <asm/ifx/common_routines.h>
-#include <asm/ifx/ifx_pmu.h>
+#include <ifxmips.h>
+#include <ifxmips_pmu.h>
+#include "ifxmips_compat.h"
 #include "ifxmips_atm_core.h"
 #include "ifxmips_atm_fw_danube.h"