# babel config file # # This config file simply documents sample entries. # "redistribute" means: redistribute routes from other routing protocols # into babel. "local" means addresses assigned to local interfaces. # # You do not need to edit this file: you can use /etc/config/babeld # instead (sections "interface" and "filter"). Both files can be used # simultaneously (the rules of this file are executed first). # the default rules are: # ## redistribute local ## redistribute deny # # this says, redistribute local addresses but no other routes # redistribute IPv4 default route into babel ## redistribute local ip 0.0.0.0/0 le 0 metric 128 # same but for IPv6 ## redistribute local ip ::/0 le 0 metric 128 # don't redistribute all local addresses, only selected ones # after the first line, the "deny" rules kicks in. After the "deny" # no redistribute local rules are going to match ## redistribute local ip 192.160.4.0/24 ## redistribute local deny # Babel refuses to redistribute routes with a protocol number of "boot"; # this is standard practice, and means that you cannot easily # redistribute the default route installed by dhcp. It is however # possible to redistribute such route by explicitly specifying "proto 3" # on the redistribute line. ## redistribute ip 0.0.0.0/0 le 0 proto 3 metric 128