target/linux/ath79/dts/qca9563_ubnt-unifiac-lite.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca956x.dtsi"
   8
   9 / {
  10         compatible = "ubnt,ubnt-unifiac-lite", "qca,qca9563";
  11         model = "Ubiquiti UniFi-AC-LITE/MESH/LR";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16
  17         leds {
  18                 compatible = "gpio-leds";
  19
  20                 wifi_ac {
  21                         label = "ubnt:white:dome";
  22                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  23                         default-state = "off";
  24                         linux,default-trigger = "phy0tpt";
  25                 };
  26
  27                 wifi_n {
  28                         label = "ubnt:blue:dome";
  29                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  30                         default-state = "off";
  31                         linux,default-trigger = "phy1tpt";
  32                 };
  33
  34         };
  35
  36         keys {
  37                 compatible = "gpio-keys";
  38                 #address-cells = <1>;
  39                 #size-cells = <0>;
  40
  41                 reset {
  42                         label = "Reset button";
  43                         linux,code = <KEY_RESTART>;
  44                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  45                         debounce-interval = <60>;
  46                 };
  47         };
  48 };
  49
  50 &uart {
  51         status = "okay";
  52 };
  53
  54 &gpio {
  55         status = "okay";
  56 };
  57
  58 &pcie {
  59         status = "okay";
  60 };
  61
  62 &spi {
  63         status = "okay";
  64         num-cs = <1>;
  65
  66         flash@0 {
  67                 #address-cells = <1>;
  68                 #size-cells = <1>;
  69                 compatible = "jedec,spi-nor";
  70                 reg = <0>;
  71                 spi-max-frequency = <25000000>;
  72
  73                 partitions {
  74                         compatible = "fixed-partitions";
  75                         #address-cells = <1>;
  76                         #size-cells = <1>;
  77
  78                         partition@0 {
  79                                 label = "u-boot";
  80                                 reg = <0x000000 0x060000>;
  81                                 read-only;
  82                         };
  83
  84                         partition@60000 {
  85                                 label = "u-boot-env";
  86                                 reg = <0x060000 0x010000>;
  87                                 read-only;
  88                         };
  89
  90                         partition@70000 {
  91                                 label = "firmware";
  92                                 reg = <0x070000 0x790000>;
  93                         };
  94
  95                         partition@800000 {
  96                                 label = "ubnt-airos";
  97                                 reg = <0x800000 0x790000>;
  98                                 read-only;
  99                         };
 100
 101                         partition@f90000 {
 102                                 label = "bs";
 103                                 reg = <0xf90000 0x020000>;
 104                                 read-only;
 105                         };
 106
 107                         partition@fb0000 {
 108                                 label = "cfg";
 109                                 reg = <0xfb0000 0x040000>;
 110                                 read-only;
 111                         };
 112
 113                         eeprom: partition@ff0000 {
 114                                 label = "EEPROM";
 115                                 reg = <0xff0000 0x010000>;
 116                                 read-only;
 117                         };
 118                 };
 119         };
 120 };
 121
 122 &mdio0 {
 123         status = "okay";
 124
 125         phy-mask = <4>;
 126         phy4: ethernet-phy@4 {
 127                 phy-mode = "sgmii";
 128                 reg = <4>;
 129         };
 130 };
 131
 132 &eth0 {
 133         status = "okay";
 134
 135         mtd-mac-address = <&eeprom 0x0>;
 136         phy-handle = <&phy4>;
 137 };
 138
 139 &wmac {
 140         status = "okay";
 141         mtd-cal-data = <&eeprom 0x1000>;
 142         mtd-mac-address = <&eeprom 0x0>;
 143 };